background image

22

ENGLISH

NOTE: Various models of the Emporio Armani Orologi collection have 
screw-down crowns. If you attempt to pull the crown out for time or 
date setting and it does not pull out easily, you may need to unscrew 
your crown before pulling the crown out. This is done by turning 
the crown counter-clockwise until it is completely unscrewed. Your 
crown will now pull out easily for time adjustment. To return crown to 
position 1, push in gently and turn clockwise simultaneously.

AUTOMATIC WINDING MOVEMENT

A timepiece fitted with an automatic winding movement obtains 
the power to wind itself by the movement of your wrist. When 
fully wound, your timepiece has a power-reserve of approximately 
38 hours. If the timepiece has not been worn for over 38 hours it 
is advised that it be manually wound to ensure necessary power-
reserve. To manually wind, keep the crown in position 1 and then turn 
it clockwise, 10 to 20 times.

Important Notes: 

As with every mechanical timepiece, the automatic 

day/date calendar is automatically adjusted by a complicated 
mechanism that is triggered between 10pm and 2am. It is important 
to avoid any adjustment of the day/date calendar setting operation 
and any backward movement of the watch hands during this period 
of time.

To ensure longevity and accuracy, it is recommended to have your 
mechanical timepiece over-hauled by a qualified technician every 
3 – 5 years.

Summary of Contents for AR2434


















Reviews: