EN
DUST COLLECTOR (DRAWER) FOR PEDICURE Х2SP
COSMETIC DEVICE NOT INTENDED FOR HOUSEHOLD USE, TRADEMARK "EMIL"
Instruction Manual
Caution!
- The dust collector (drawer) is not intended for household use! Use it only to perform
the intended functions - professional use (pedicure)!
- This device is not intended to be used by persons (including children) with limited
physical, perceptive or mental abilities nor the persons with lack of experience and
knowledge, except for cases, when they have been trained by the person responsible
for their safety.
- Children should be supervised to prevent playing with the device.
- In case of damaging the feeder cable, to prevent any hazards it should be replaced by
the manufacturer, relevant service or equally qualified personnel.
Maintenance: Unplug this product from wall outlets before cleaning. Clean the unit with
a lightly moistened cloth treated with an antiseptic alcohol base solution. Avoid contact
with water! - Clean the dust bag with warm water every working day! The manufacturer
is not responsible for the suction capacity if the dust bag is not completely dust-free! -
Only use original bags supplied with the appliance! - Avoid direct sunlight! - Store and
use the device at room temperature (+ 15 ° C to + 35 ° C), with a maximum humidity of
60%.
- The failure to comply with this user manual may reduce the safety and quality of this
device.
Dust collector device is intended for collection of dust and small particles produced during
pedicure
.
Type
:
Pedicure
Description
Dust collector (drawer) consists of a body with integrated suction fan with blades protected
with chrome plated metal grid, cable with a switch, double layered bag for collection of
dust and small particles.
Preparation for operation and start of the device
EMIL X2SP device must be attached to the chair using the screws intended for this purpose.
After this has been done, the bag for collecting dust and small particles must be attached
to the dust collector (drawer). The device is switched on using a switch on the feeder
cable.
CAUTION! Warranty is valid only if the client follows the warranty and operation
conditions. Conditions of warranty repairs.
Warranty applies in following cases:
1.
Availability of warranty ticket that is attached to the device according to the operational
conditions.
2.
Presence of document confirming the transaction (purchase (cash-register)
receipt, stringent accountancy receipt or bank transfer order) that identifies the particular
device purchased.
3.
Manufacturer shall be held liable for the suction capacity of the
device only in case the dust collector bag is completely free of dust!
4.
Device shall be
taken to warranty repair together with the warranty ticket and document confirming the
transaction.
