Emfit SafeBed Installation And User Manual Download

Page: 1 / 24

www.emfit.com

29 September 2010

Manual-SafeBed-SafeSeat-t46-v1-1-5-v3.0-ENG

Installation and User Guide

SafeBed™ and SafeSeat™

Bed / Seat Occupancy Monitor

User’s Manual with Operation and Installation

Instructions and Warranty Terms

WARNING! Must Not be used IN sItuAtIoNs WHeRe A MAlfuNctIoN

oR A lAteNt desIGN flAW IN tHe PRoduct could leAd to A delAy IN

delIveRy of APPRoPRIAte MedIcAl cARe oR tHAt Would lIkely leAd

to A PoteNtIAlly lIfe tHReAteNING sItuAtIoN

Applicable model numbers:

control unit d-1070-2G

under Mattress bed sensor l-4060sl
seat sensor l-3030sl

29 september 2010, t46 v1.1.5

emfi, emfit and emfit logo are either registered trademarks or trademarks of emfit ltd

reserved. Patented, patents pending. list of patents is seen at manufacturer’s web site

www.emfit.com

Summary of Contents for SafeBed

























Search results

Summary of Contents for SafeBed

Reviews:

Related manuals for SafeBed

Brands by name

Popular brands

Emfit SafeBed, Installation And User Manual

Search results

Summary of Contents for SafeBed

Reviews:

Related manuals for SafeBed

Brands by name

Popular brands