![background image](http://html1.mh-extra.com/html/emfinders/emseeq/emseeq_user-manual_2400977001.webp)
NOTICES
This document neither grants any license nor conveys
any rights with respect to the subject matter hereof
or otherwise. EmFinders expressly retains all intellectual
and other property rights with respect to this document
and all matters set forth herein. This document is
neither an offer nor an acceptance. Neither party will
be obligated with respect to the subject matter hereof
unless and until such party has entered into a definitive
agreement. Some technical assertions of capability
included herein are estimates based on limited
information gathered from past experience.
Activation and use of the EmFinders locator is subject
to EmFinders’ customer agreement, plans, terms &
conditions, and network coverage.
TRADEMARKS
EmFinders, the EmFinders logo, EmSeeQ and Locate
the Lost are trademarks of JJCK, LLC, and protected in
the United States and other countries.
EmFinders EmSeeQ V. 1.0
Feature Specification
Size: (unit without band) 39mmx55mmx19mm
Weight: 25 grams
Frequency: 824.2 – 848.8MHz and 1850.2 –1909.8 MHz
Transmit Power: +33 dBm max @ 824.2 – 848.8MHz
+30 dBm max @ 1850.2 – 1909.8 MHz
Battery Voltage: +4.2VDC max
Operating Temp.: -10º C to +55ºC
Water Resistance: IPX7
Certifications
FCC: Parts 15B, 22 and 24; SAR PTCRB NAPRD.03 ETSI/
3GPP TS 51.010-1 and IT3 TP012 UL, (power adapter)
AC Wall Charger Specifications
Input: 110-130 VAC, 50-60 Hz, 0.15A
Output: 6.0VDC, 1.0A
Operation Temperature: 0ºC to +40ºC
EmFinders™ EmSeeQ™, Locate the Lost™,
www.EmFinders.com COPYRIGHTS © 2009 JJCK,LLC.
All rights reserved. EmFinders is the registered
business name of JJCK, LLC.
Warranty Limitations
THIS WARRANTY SHALL BE NULL AND VOID IF THIS
PRODUCT: (a) IS USED FOR COMMERCIAL PURPOSES;
(b) IS MODIFIED, OPENED OR TAMPERED WITH; (c) IS
DAMAGED BY NEGLIGENCE, ACCIDENT, UNRESONABLE
USE OR OTHER CAUSES UNRELATED TO DEFECT IN
MATERIAL OR WORKMAPSHIP.
Water Resistance
The EmFinders EmSeeQ has a water resistance rating
of IPX7. The EmSeeQ device will continue to function
even if temporarily submerged in up to one meter
(3 feet) of water.
Specifications and Certifications
This section provides the following detailed
specifications and certifications:
EmFinders EmSeeQ Specifications
Certifications
AC Wall Charger Specifications
Warranty Information
EmFinders warrants to the original purchaser that the
EmFinders EmSeeQ shall be free from defects
in material and workmanship for a period of 12
months from date of activation. If a defect covered
by this warranty occurs during the warranty period,
EmFinders will repair or replace your EmSeeQ device
or component free of charge. If your EmSeeQ device
is replaced for a defect covered under warranty, you
may receive a refurbished EmSeeQ device in exchange
for your original EmSeeQ device. The replaced unit will
carry the remaining warranty period from the original
EmFinders EmSeeQ. Please contact our Customer Care
Center at
1-866-426-3386
for warranty service. This
warranty is non-transferable.
Service After Expiration of Warranty
Please visit our website at www.EmFinders.com or call
our Customer Care Center at
1-866-426-3386
for
troubleshooting information and repair or replacement
options. In most cases, it will be necessary to ship
the product to EmFinders. Please do not send any
products to EmFinders without first contacting our
Customer Care Center.
When the EmFinders EmSeeQ reaches its end of life,
contact local authorities to learn about disposal
and recycling options. See www.EmFinders.com for
more information.
Reduction of Hazardous Materials (RoHS)
This Locator does not contain lead, cadmium, mercury,
hexavalent chromium, polybrominated biphenyl (PBB)
or polybrominated diphenyl ether (PBDE).
Specific Absorption Rate (SAR)
Your EmFinders EmSeeQ is a radio transmitter and
receiver. It does not exceed exposure limits for
wrist-worn devices set by the Federal Communications
Commission (FCC) and international guidelines
established by the independent scientific organization
ICNIRP. The exposure standard for wireless devices
uses a unit of measure called Specific Absorption Rate
(SAR). The SAR limit set by the FCC is 1.6 W/kg
averaged over 1 gram of tissue. The SAR limit set
by ICNIRP is 2.0 W/kg averaged over10 grams of tissue.
Tests for SAR are conducted at standard operating
positions with the EmSeeQ device transmitting at
its highest power level over all frequency bands. The
actual SAR level of an operating EmSeeQ device
can be below the maximum value because the EmSeeQ
device is designed to only use the power level required
to reach the network.
FCC Regulations
This EmSeeQ device complies with part 15 of the
FCC Rules. Operation is subject to the following two
conditions: (1) This EmSeeQ device may not cause
harmful interference and (2) this EmSeeQ device
must accept any interference received, including
interference that may cause undesired operation.
This EmSeeQ device has been tested and found to
comply with the limits for a Class B digital Device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against
harmful interference in a residential installation.
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation.
EmFinders EmSeeQ Disposal and Recycling
CAUTION: RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED
BATTERIES ACCORDING TO THE INSTRUCTIONS.
You must dispose of the EmFinders EmSeeQ properly
according to local laws and regulations. Because
the EmSeeQ device contains electronic components
and a battery, the EmFinders EmSeeQ must be
disposed of separately from household waste.
Safety and Warranty Information
This section addresses six primary areas:
Safety information
FCC Regulations
Reduction of Hazardous Materials (RoHS)
Specific Absorption Rate (SAR)
Warranty Information
Water Resistance
Safety Information
Your EmFinders EmSeeQ contains a Lithium Ion
(LI) battery pack. Leakage of ingredients contained
within the battery pack or the combustion of
ingredients can cause personal injury to you, as well
as damage to your EmSeeQ device. If battery leakage
occurs, avoid contact with skin. If contact occurs,
immediately wash thoroughly with soap and water.
If liquid leaking from battery pack comes in contact
with your eyes, immediately flush your eyes
thoroughly with water and contact your doctor. In
case of ingestion, immediately contact your
doctor and/or go to the emergency room.
To avoid battery leakage
• Do not expose battery to excessive
vibration, physical shock or liquids.
• Do not disassemble, attempt to repair
or deform the battery.
• Do not dispose of battery pack in fire.
• Do not peel or damage the battery label.
Contacting Customer Care
Need help with operating your EmFinders EmSeeQ?
Contact EmFinders Customer Care via the internet at
www.EmFinders.com, or call toll free
1.866.426.3386
,
Monday – Sunday, 7 a.m. – 11 p.m. CST (times subject
to change) to speak to a Customer Care Representative.
Summary of Contents for EmSeeQ
Page 1: ...Q at 6 ect tive ...