background image

1

• 

Unstable installation causes vibration and

noise of refrigerator.

• 

Wooden floor or carpet can be discolored

under the refrigerator.

• 

Doors look hanged down due to the twist

of refrigerator unless it is leveled.

• 

More than 6 or 10 cm from 3 sides (left,

right and back) is good enough for

ventilation.

• 

Insufficient space causes the noise of

vibration, weakening of refrigerating

power and the waste of electricity.

• 

Direct sun lays, side heat of stove and gas
range can weaken the refrigerating power.

• 

Avoid location by a sink or where moisture
and water can cause rust and corrosion.

• 

Avoid location where moisture can cause
electrical problems.

• 

Use hard board or plank on the
concrete/cement floor. 

1. Installation Instructions

Where the floor is solid and level

Where ventilation is good

Where there is little or no heat, moisture

Suitable Installation Place

Grounding is necessary

where

Grounding by using

grounding wire

Grounding by using 

short-circuit breaker

Grounding is not necessary

You should not connect the

ground wire to

Grounding terminal is the yellow/green one connected to the power cord in the back of  refrigerator.

Bury copper plate to whitch grounding wire is connected 25 cm deep in the ground.

Short-circuit breaker is a must where the floor is always wet, for example, fish shop,

restaurant kitchen etc.

in case of using side-grounded outlet.

water pipe, gas pipe, telephone line, 

lightening-rod.

There can be explosion or fire.

Grounding wire

Side
Grounded
outlet

Grounding

Correct usage of Refrigerator

water can splash easily ;

bathroom etc.

there is much moisture ;

basement etc.

any wet and/or watery

places.

Plug in the refrigerator right

after installation.

Set the fresh food compartment’

temperature to “7” to perform

preparatory run for 2 or 3 hours.

When the inside is cold enough,

put the foods in.

* See page

for details.

* When the surrounding temperature is hot in midsummer, do not open and shut the

doors too often after installation.

2

CONTENTS

1. Installation Instructions .................................. 1

Suitable Installation Place.................................. 1
Grounding .......................................................... 1
Correct usage of Refrigerator ............................ 1
Installation Process ............................................ 1

2. Safety Instructions .......................................... 2

3. Looks Out of Order, But, Not. ........................ 6

4. Name of Each Part & Function....................... 8

5. Freezer/Refrigerator Department................. 10

6. Care & Cleaning............................................. 11

7. Helpful Hints................................................... 12

8. Efficient Storage of Foods............................ 12

Summary of Contents for EMRT16612









Reviews: