Zertifizierungsstelle
SIBE Schweiz
Instruction manual for
RP 100 6 EMCT Electronic Test Buzzer
1
Battery box
2
Test buzzer
3
Measuring line
4
Test terminal
5
Pluggable test terminal
Table of contents
1
Introduction ........................... 1
1.1
Application .............................. 1
1.2
Remarks ................................. 1
1.3
Scope of delivery .................... 2
2
Safety instructions ................ 2
3
Instruction ............................. 2
3.1
Bringing into service ............... 2
3.2
Continuity check ..................... 2
4
Maintenance .......................... 3
4.1
Battery change ....................... 3
5
Technical data ....................... 3
EC Declaration of Conformity .............. 4
1
Introduction
1.1
Application
The RP 100 6 Electronic Test Buzzer can be used for the ohmic continuity check of switches,
lines, circuits, fuses, lamps, diodes, transistors, polarity tests, coils, resistors, transformers,
relays and contractors. Resistance test range is between 0 and 1 k
Ω.
Protected against external voltage
Test range: low or high ohmic
Test terminal pluggable
Red plastic housing shockproof
1.2
Remarks
In this instruction manual noted remarks:
Warning:
Warns of a danger which could bring injuries.
Indication:
Has to be considered!
Important:
Important information!
1
2
3
5
4
