Pneumatic Air-Lift Screen User Manual
General Notes
1.
Thank you for choosing our projection screen for your home or business. Please read the user manual carefully before
proceeding.
2.
When not in use, fully close the screen and the case to prevent damage to the screen.
3.
When cleaning, use a soft damp cloth with warm water or diluted liquid detergent to remove any marks on the casing
or on the screen surface.
4.
Never attempt to use any solutions containing corrosive chemicals or abrasive cleaners on the screen surface.
5.
To avoid damaging the screen, do not fold the screen or touch the screen directly with your hands, tools, or any other
abrasive/sharp object.
6.
Do not throw the screen. If the screen needs to be transported, close the screen and the two latches on the case and
carry by the handle.
7.
Curvature will appear in the edge of fabric when fabric is extended completely, it is a common phenomenon and the
curvature will gradually disappear after you extend the screen for about ten minutes.
Safety Guide
1.
When using the screen, rotate the feet and place it on a flat, stable surface.
2.
If the screen is being used outdoors, ensure there are no environmental hazards which could cause damage to screen
and others around it. This includes but is not limited to wind, precipitation, flying objects, and pets.
Parts Identification
1. Bar handle
2. Screen fabric
3. Skirt film
4. Left end cap
5. Rotating foot
6. Bottom case
7. Right end cap
8. Case cover
9. Case latch
10. Top bar
11. Long arm
12. Upper arm hinge
13. Short arm
14. Lower arm hinge
15. Pneumatic piston
16. Case handle
