Elpas3 Personal Safety Bracelet
5-WTG41100-0, 5-WTG41120-0 (Mother Tag), 5-WTG41102-0 (Security Band)
Installation Guide
www.elpas.com
Page 1 of 4
V1/July 2015
Introduction
The Elpas3 Personal Safety Bracelet is an attractive bracelet that provides around-the-clock
monitoring of medical patients and assisted living care residents who require added safety.
The bracelet bundles tri-tech (in Mother Bracelet
– quad-tech, includes LF transmission) Real-Time
Location System (RTLS) technologies to deliver precise real-time positioning data so that a host RTLS
safety application or an integrated physical security platform can track the whereabouts of the
individual anywhere within the facility.
Note:
IR is optional. If irrelevant, users can deactivate IR functionality to conserve battery.
Elpas3 Personal safety Bracelet includes RF reception as well as transmission to allow two-way communication with
Eiris. Eiris can acknowledge when it receives an RF message.
The bracelet features a large duress call button designed especially for senior citizens. Pressing the
button causes the tag to transmit positioning data that identifies the person requiring assistance and
the precise building location of the involving medical or safety incident for speedier and more effective
response efforts.
Note:
It is optional to replace the button cover of the tag with a standard plastic cover.
The Mother version also pairs with an Elpas Infant Protection Charm. With the press of the bracelet
button, the infant charm flashes a color, indicating the two are paired. When a user presses the button
again, the bracelet transmits an LF signal that tests if it matches with the Infant Protection Charm.
Once the pairing is made, only the wearer of the Mother Bracelet can exit designated areas with the
baby who wears the Infant Protection Charm with which it is paired.
The bracelet enables immediate near-exit location awareness for administering patient/staff escort
procedures and for preventing unauthorized transfers into or out of protected building areas.
Product Specifications
RT LS T echnologies
RF Reception and Transmission (433MHz); IR Reception (125KHz) ; LF Reception (125KHz) ; LF Transmission (in Mother Bracelet)
RF (Motion/Stationa ry)
Supervision messages every 10 seconds / 60 seconds
IR ( Motion/ Stationary)
Supervision messages every 10 seconds / 60 seconds
Supe rvised Events
LF Entry/Exi t: Button Press/Rel ease, Moti on/Stati onary, Low Battery
RF Under LF
Entry into LF: 3 transmissions (each @ 2ms in duration), 0.5secs apart; every 2 seconds.
After 10 minutes under LF: Returns to 10 seconds while in motion
Power So urce
(recommended)
3.0V/560mAH lithium battery, CR 2450
Battery Life
12-36 months depending upon usage
LED Indicator
Low Battery (flashes every ten sec when below 2.6 Volts), Button Press (flashes three times), LF Field (flashes three times)
T ag & LF ID Codes
Factory-Programmed
Housing
IP65, Nylon Plastic
Weight
41.1 grams (1.45 ounces)
Dime nsions (H x W x D)
46.9 x 41.0 x16.8mm (1.84 x 1.61 x 0.65 inches)
Operating Envi ronment
Temp: -30°C to 70° C (-22°F to 158°F)
Humidity: 100% non-condensing
Ma nagement Software
Eiris
Regulatory
CE, FCC, IC compliant and certified
Warrant y
1 year limited warranty
Product offerings and specifications are subject to change without notice.
Not all products include all features.
Accessories
Part Number
Description
5-BT E00433 -1
Elpas Infant Protection Charm
5-PB063011
Disposable Secure Hospital ID Band (set of 50)
5-WT A90007
Canvas Wristband with Lock Pin (set of 5)
5-500130
Lock Pin Removal Magnet
5-WT D09012
Security Band (set of 5). To insert, remove band adapters
5-WT D09009
Band Lock Ke y (set of 5)
5-WT D09017
W TD No Button Cover (set of 5 wi th 20 screws)
