Awning drive SunTop
138133501_EN_0719
Awning drive SunTop
1
Operating and assembly instructions
Please keep this operating manual for future reference to
ensure that it can be accessed throughout the entire service
life of the product!
The German operating manual is the original version.
All documents in other languages are translations of the
original version.
All rights reserved in the case of patent, utility model or
design registrations.
2
General information on these
instructions
The content structure is based on the life cycles of the elec-
tric motor drive (hereinafter referred to as “the product”).
The manufacturer reserves the right to make changes to
the technical data in these operating instructions. In some
cases, this technical data may differ from those of the
respective product version; however, the functional informa-
tion will not undergo significant changes or become invalid.
The current version of the technical specifications may be
requested from the manufacturer at any time. No claims
may be asserted against the manufacturer as a result of this
provision. Deviations from textual or visual statements may
occur depending on the product's technical development,
features and accessories. Deviating information for special
versions will be provided by the manufacturer in the sales
documentation. Other information shall remain unaffected
by these provisions.
2.1 Standards and guidelines
During construction, the fundamental health and safety
requirements were applied and provision was made for the
appropriate legislation, standards, directives and guidelines.
The safety of the product is confirmed by the declaration
of conformity (see EC Declaration of Conformity). All in-
Contents
1
Operating and assembly
instructions
1
2
General information on these instructions 1
2.1
Standards and guidelines
1
2.2
Intended use
2
2.3
Foreseeable misuse
2
2.4
Warranty and liability
2
2.5
Customer service provided by the manufacturer 2
3
Safety
2
3.1
General safety instructions
2
3.2
Layout of safety instructions
2
3.3
Safety principles
3
3.4
General duties of the plant operator
3
3.5
Requirements of the personnel
3
3.6
Safety notices and directions relating
to the technical condition
3
3.7
Safety notices and directions relating
to transport, assembly and installation
4
3.8
Safety instructions relating to operation
4
3.9
Safety notices and directions relating
to the electrical installation
4
4
Product description
4
4.1
Product contents
4
4.2
Accessories
4
5
Assembly
4
5.1
Mechanical fastening
5
5.2
Electrical connection
6
5.3
Connection example SunTop 230 V/50 Hz
6
5.4
Parallel circuit
6
5.5
Commissioning
6
5.6
Setting of end positions and strain relief
7
5.6.1 Relief function for end position(s)
7
5.6.2 Relief function at upper end position
7
5.6.3 Relief function at lower end position
7
5.6.4 Changing/deleting the end positions
and deleting the relief function
7
5.6.5 Four variants of end position settings
7
5.6.6 Variant A:
Upper and lower end position freely adjustable 7
5.6.7 Variant B: Fixed upper end position, lower
end position freely adjustable
8
5.6.8 Variant C: Fixed upper and lower end position 8
5.6.9 Variant D: Upper end position freely adjustable,
fixed lower end position
8
6
Troubleshooting
8
7
Servicing
9
8
Cleaning
9
9
Repairs
9
10
Manufacturer's address
9
11
Disassembly and disposal
9
12
Notes on EC Declaration of Conformity
10
13 Technical data and dimensions 10
13.1 SunTop S
10
13.2 SunTop M
11
13.3 SunTop L
12
