background image

©Elation Professionals®  -  www.elationlighting.com  - TVL3000WW/TVL3000CW Instruction Manual Page 2

  TVL3000WW/TVL3000CW        

                 General Information

Unpacking: 

Thank you for purchasing the TVL3000WW or 

TVL3000CW by Elation Professionals

®

. Every TVL3000WW & 

TVL3000CW has been thoroughly tested and has been shipped in 

perfect operating condition. Carefully check the shipping carton for 

damage that may have occurred during shipping. If the carton appears 

to be damaged, carefully inspect your fixture for any damage and be 

sure all equipment necessary to operate the unit has arrived intact. In 

the event damage has been found or parts are missing, please contact 

our toll free customer support number for further instructions. Please 

do not return this unit to your dealer without contacting customer sup-

port first. 

Introduction: 

The TVL3000WW & TVL3000CW are DMX intelligent 

LED fixture’s. The TVL3000WW & TVL3000CW have 1 DMX channel, 

which is a master dimmer. This fixture’s have two operating modes; 

manual mode or DMX controlled. The TVL3000WW & TVL3000CW can 

only be run as stand alone unit. The light projections can be enhanced 

using fog or special effects smoke. 

Customer Support:

 Elation Professionals

®

 provides a toll free cus-

tomer support line, to provide help and to answer any question should 

you encounter problems during your set up or initial operation. You 

may also visit us on the web at www.elationlighting.com for any com-

ments or suggestions. Service Hours are Monday through Friday 9:00 

a.m. to 5:00 p.m. Pacific Standard Time.

 

Voice:   

(323) 582-3322

 

Fax:    

(323) 832-9142

 

E-mail:  

[email protected]

To purchase parts online visit http://parts.elationlighting.com

Warning! 

To prevent or reduce the risk of electrical shock or fire, do 

not expose this unit to rain or moisture. 

Warning! 

This may cause severe eye damage. Avoid looking directly 

into the light source at all times!

User Instructions

TVL3000WW/TVL3000CW

  7/11

Summary of Contents for TVL3000WW









Reviews: