PB82-S 8-Outlet Slim Surge Protector Setup Guide
①
③
②
PRODUCT FEATURES
USING YOUR SURGE PROTECTOR
1.
Ensure the power is off on the devices you will be connecting to the AC outlets on the surge protector.
2. Plug the surge protector into a properly grounded AC wall outlet and turn on the surge protector.
3. Check that the PROTECTED and GROUNDED blue LEDs are illuminated. If the PROTECTED LED is not illuminated, the surge
protector is not operating properly and will not protect your connected devices. If the GROUNDED LED is not illuminated the
outlet the surge protector is connected to is not properly grounded and should not be used. Please have a licensed
electrician diagnose and troubleshoot the affected wall outlet prior to use.
4. Plug your equipment into the outlets on the surge protector and power on your devices as usual.
5. USB devices can be charged/powered by simply connecting the USB power cord to USB ports on the surge protector. The
USB ports deliver 5V and up to 2.4amps of power.
•
RISK OF ELECTRIC SHOCK – Use only in dry locations and only
indoors.
•
DO NOT plug into another relocatable power tap.
•
DO NOT “daisy chain” surge protectors.
•
DO NOT plug into 220V outlet or power source.
•
DO NOT use with any aquarium equipment.
•
DO NOT connect to an ungrounded outlet.
•
DO NOT install this device if there is not at least 30 feet (10 meters),
or more of wire between the electrical outlet and electrical service
panel.
•
This device features internal protection that will disconnect the
surge protective component at the end of its useful life
(PROTECTED LED WILL TURN OFF) , but will maintain power to the
outlet – WHICH WILL BE UNPROTECTED. If you don’t want your
equipment at risk, follow the manufacturer’s instructions for replac-
ing the device.
•
DO NOT use in any circumstance that would affect the operation or
reliability of life support equipment, any medical applications, or
patient care.
SAFETY INFORMATION
TECHNICAL SPECIFICATIONS
Number of Outlets
8
Number of USB Ports
2—5V total 3.4A
AC Outlets
All 8 filtered with surge protection
Protection Modes
L-N, L-G, N-G
Thermal Fuse
Yes
Maximum Current
15 Amps
Line Voltage
120V @ 60Hz
Certification
UL 1449, UL 1363, FCC, ICES
Max Energy Dissipation
2160 Joules
Max Spike Voltage / Current
6,000V / 144,000A
Response Time
1 Nanosecond
Filtration
EMI / RFI 40dB
ELAC AMERICAS INC.
1938 N. BATAVIA ST. SUITE K
ORANGE, CA 92865
Copyright 2021 ELAC Americas Inc.
⑤
④
①
Dual USB Charging Ports: 5V 3.4 Amp Total USB-A ports
for charging compatible devices1
②
PROTECTED LED—If illuminated, the unit is working
properly. If not illuminated your connected equipment is
not being protected. Contact ELAC Customer Support1
③
GROUND LED—If illuminated the outlet that the surge
protector is connected to is properly grounded. If this
light is not illuminated the outlet is not properly grounded.
④
AC Outlets—Plug Equipment directly into these outlets.
Do not use an extension cord, UPS, or power strip.
⑤
Power Switch / Breaker Reset—Switch to turn the power
to the AC outlets and USB port on and off.
