• 120V, 60Hz, 70W, 5 Oz (142 gm)
• TEMP. RANGE: 400°F - 800°F (205°C - 427°C)
• TEMP. REGULATION: ±6°F (±3°C)
• TIP TO GROUND LEAKAGE: < 2MV
• TIP TO GROUND RESISTANCE: < 2 OHMS
• COMPLIES WITH DOD-STD-2000-1B, MIL-
STD-2000A and ESD SPEC. DOD-STD 1868,
DOD-HDBK-263
LISTED
made
in
U S A
CL1180
LONER
®
Temperature Controlled
SOLDERING INSTRUMENT
920
Soldering Station
includes CL1180 and IP329
WICK AND SOLDER SUPPLIES SOLD
SEPARATELY
IP329
Tool Base
925
Soldering Station
includes CL1180 , PD528 and PS536
Sponge Holder
Power Switch
PD528 Tool Holder
not included with PS536
PS536
Power Supply
120 VAC
Receptacle
Sponge Holder
TIP CARE
1. Plug-in Tool. Set to desired temperature. (Blinking lamp
means set temperature is reached.)
2. TIN the Tip (apply solder) before soldering.
3. Do not rub, bend or file Tip.
4. Always clean the Tip by wiping it against the saturated
sponge, then re-tin.
5. ALWAYS RE-TIN THE TIP BEFORE AND AFTER USING.
RS372
Retaining Sleeve
Hollow Heater
Burn Resistant
Temp. Control
(inside collar)
Soldering Tip
