![background image](http://html.mh-extra.com/html/econoline/ra-400/ra-400_instruction-manual_2355005001.webp)
RA 400 & 600 CFM DUST COLLECTOR
INSTRUCTION MANUAL
CARTRIDGE
LARGE CAPACITY DUST COLLECTOR
The Econoline 400 & 600 CFM-C Style Dust Collectors are constructed with a 9” diameter x 24”
height Cartridge Style Dust filter. This filter is 98.98% efficient, filtering .5-micron particles at
1.5:1 air to-cloth-ratio. This unit also features the ability to clean the filter utilizing an air-
actuated vibrator. This vibrator shakes free the dust adhered to the cartridge depositing it into
the units hopper for easy removal. This process allows the dust collector to operate at peak
efficiency, clearing your abrasive blast cabinet of dust for better visibility.
SET-UP AND OPERATING INSTRUCTIONS
READ INSTRUCTIONS COMPLETELY BEFORE USE
1)
Locate the 10-foot section of 4” diameter vacuum hose packed inside of unit.
Connect one end to 4” diameter tube on back or side of blast cabinet (See drawing).
Secure with hose clamp.
2)
Connect opposite end of vacuum hose to the 4” diameter intake tube on the back of
the dust collector (see drawing). Secure with hose clamp.
3)
Plug power cord on dust collector into the receptacle on the blast cabinet’s light box
assembly (located on back side). Dust collector will now start when blast cabinet
light is turned on.
4)
Attach airline to ball valve on top of dust collector with quick disconnect (minimum
¼” diameter).
a.
This air is used to clean filter by actuating vibrator mounted to filter support plate.
b.
This should be done once every hour or each time you finish blasting.
c.
Position waste container under unit’s trap door; dump waste dust into container by
pushing down on trap door.
ECONOLINE ABRASIVE PRODUCTS, INC.
401 NORTH GRIFFIN
GRAND HAVEN, MI 49417
616-846-4150
Summary of Contents for RA 400
Page 3: ......