Installation sheet
Please read the following safety instructions carefully
and follow the installation steps in sequence.
UM11-RP Universal Roll-out Shelf
UT11-RP Transition Roll-out Shelf
UM75-RP Drop File Roll-out Shelf
UM14-RP 12" Bin Drawer
UM20-RP 15" Bin Drawer
UO47-FP Center Rails for Front-to-back Filing
PLEASE NOTE:
1. Some file drawer accessories may not be used in
combination with one another.
2. Some of the following instructional information
may not pertain to all of the above listed products.
SIDE EXTENDERS
15" Bin Drawers (item number UM20-RP) require
side extenders to increase the filing height of the
drawer sides. To assemble the extensions, position
them as shown in figure 1 and secure each side with
three #10 phillips head self tapping screws.
(The
screws must be assembled from inside the drawer.)
BIN DRAWER FRONT
12" and 15" Bin Drawers (item numbers UM14-
RP and UM20-RP) require a solid front panel. To
assemble the panel first hook the panel’s bottom
flange under the drawer handle and then pivot the
panel to a vertical position. Secure the panel by
installing either two or three (depending on the
drawer size) #8 phillips head self Universal roll-out
tapping screws into each side. See figure 2.
Modular bin drawers
Extender
15" Bin drawer
#10 Phillips head
self tapping screws
Figure 1
Figure 2
Universal
roll-out
Front panel
Bottom flange
Roll-out handle
#8 Phillips head
self tapping screws
