UPS MAINTENANCE
EATON
Powerware
®
9125 Two-in-One UPS (700–2000 VA) User’s Guide
S
164201514 Rev B
www.powerware.com
49
How to Replace Internal Batteries
C A U T I O N
Pull the battery out onto a flat, stable surface. The battery is unsupported when you pull it
out of the UPS.
To replace the UPS internal batteries:
1.
Remove the UPS front cover (see Figure 29).
NOTE
DO NOT attempt to open the left side.
Figure 29. Removing the UPS Front Cover
2.
Unscrew and set aside the battery retaining bracket (see Figure 30).
3.
Disconnect the battery cable from the UPS battery connector and
remove the battery cable from the wire clips.
Battery Retaining Bracket
Wire Clips
Battery
Connector
Figure 30. Accessing the UPS Internal Battery
