Microphone
Connect a dynamic microphone to the
Mic
port, using a 3.5 mm mini-jack cable.
3.5 mm mini-jack cable
Video device
Connect multiple video devices and use the
Source Search
button on the
projector or remote control to switch between them. For more information on
playing sound through the projector, see the online User’s Guide.
Component video
to VGA cable
3.5 mm
audio cable
RCA video cable
(composite video)
HDMI
cable
RCA audio
cable
Note:
If you connected a streaming device to an HDMI port, you can also
connect it to the projector’s
USB-A
(flat) port for power.
Camera, USB device, or document camera
Connect a digital camera, USB flash drive, USB storage device, or Epson DC-07
document camera to the projector’s
USB-A
(flat) port.
USB cable
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. You can also connect other Epson document
cameras to the projector. See the online User’s Guide for details.
Using the remote control
Install the two AA batteries as shown.
Choose which source
to display
Turn projector on
and off
Access projector menus
Turn off projector
display and sound
Access the Home
screen
Navigate projector
menus
Control projector
volume
For more information on using the remote control, see the online User’s Guide.
Turn on your equipment
1
Turn on your computer or video source.
2
Make sure the power cord is connected and plugged into an
electrical outlet.
3
Press the
power button on the projector or remote control. The
projector beeps, and the Status light flashes blue and then stays on.
Note:
To shut down the projector, press the power button twice.
4
Follow the on-screen instructions to set up your projector. If you see
a screen displaying 123, select the upright option and press on the
remote control to continue.
5
If you don’t see an image, press the
Source Search
button on the
remote control to select the image source.
Note:
If you still see a blank screen or have other display problems, see
the troubleshooting tips on the back of this sheet.
6
Use the arrow buttons on the remote control to highlight any of the
options on the Home screen, then press to select it.
7
The default language of the menu system is English. To select another
language, press the
Menu
button on the remote control. Select
Management
and press . Select
Language
and press . Select your
language and press . Press the
Menu
button to exit the menu system.
Adjust the image
1
To raise the image, press the foot release button and lift the front of the
projector. Release the button to lock the foot in position.
2
To reduce or enlarge the image, press the
W
(wide) or
T
(tele) button on
the projector.
3
To sharpen the image, turn the focus ring on the projector.
4
If your image looks like
or
, you may have placed the projector
off to one side of the screen at an angle. Place the projector directly in
front of the center of the screen, facing the screen squarely. If you can’t
move the projector, use the horizontal keystone slider on the projector to
correct the image shape.
5
Your projector automatically adjusts an image that looks like
or
,
but if necessary you can press the
or
button on the projector to
correct it.
Network your projector
Wireless network configuration
Follow these steps to set up the projector for a wireless network connection.
1
Press the
Menu
button on the remote control.
2
Select the
Management
menu and press .
3
Select
On
as the
Wireless LAN Power
setting.
4
Select the
Network
menu and press .
5
Select
Network Settings
and press .
6
Select
Wireless LAN
as the
Priority Control Interface
setting.
7
Select one of the following as the
Simple AP
setting:
•
On
for a direct connection to a computer, tablet, or smartphone.
•
Off
to connect your projector to a router or access point.
Note:
If you directly connect to the projector, you can only project locally
stored content.
8
Select any other wireless settings as necessary. See the online User’s Guide
for details.
9
When you are finished, return to the Network Settings menu and select
Set
to apply your settings. Then click
Yes
to save the settings.
10
Press the
Menu
button to exit the menu system.
EB-L210SF/EB-L210SW
Quick Setup
IMPORTANT:
Before using the projector, make sure you read these instructions
and the safety instructions in the online User’s Guide.
Note:
Product availability varies by country and region.
Note:
The illustrations show the EB-L210SW, but the steps are the same for all
models, unless otherwise specified.
Connect the projector
Computer
Choose from the following connections. See the sections below or the online
User’s Guide for details.
VGA cable
USB cable
HDMI cable
HDMI
®
port
Connect one end of an HDMI cable to one of the projector’s
HDMI
ports and
the other end to an HDMI port on your computer.
Computer port
Connect one end of a VGA cable to one of the projector’s
Computer
ports, and
the other end to your computer’s
monitor port. If you are using a laptop,
switch it to external display (see “Troubleshooting”). You can also connect an
audio cable.
Note:
To use the projector’s Computer2 port, change the
Monitor Out Port
setting in the Signal I/O menu. See the online User’s Guide for details.
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
®
7 or later:
After turning on the projector, follow the on-screen
instructions to install the Epson
®
USB Display software (
EMP_UDSE.EXE
; only
on first connection). If the software screen does not display automatically, open
My Computer
,
Computer
, or
This PC
, then double-click
EPSON_PJ_UD
.
OS X 10.8.x or higher:
After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software
(only on first connection). If the software screen does not display automatically,
double-click
EPSON_PJ_UD
, then double-click
USB Display Installer
.
Screen mirroring
You can use Miracast
®
to send images to your projector from supported
smartphones, tablets, and laptops. See the online User’s Guide for details.
External monitor and speakers
You can connect an external monitor and external speakers to your projector to
enhance your presentations. See the online User’s Guide for details.
Wired network
Connect the projector to your network using an Ethernet cable. See “Wired
network configuration” on the back of this sheet for more information.
Ethernet cable
