![background image](http://html.mh-extra.com/html/eaton/2596/2596_manual_525787001.webp)
Installation, Operation & Maintenance Manual
Control Panels for Automatic Self-Cleaning Strainers
Model 596 and Model 2596
IOM
Controls 04/2020
REV B.
Page
1
of 9
Eaton Filtration LLC,
44 Apple
Street, Tinton Falls,
NJ
07724 www.eaton.com/filtration
Phone:
732-212-4700
Read all the following information and instructions prior to installing and operating the equipment.
Failure to comply with these instructions could result in bodily injury or property damage.
TABLE OF CONTENTS
Introduction ...................................................................... 1
Receiving, Handling, and Inspection ................................. 2
Storage .............................................................................. 2
Operating Modes .............................................................. 2
Continuous Backwash .......................................... 2
Automatic Backwash (Timed Cycle) .................... 2
Valves ................................................................................ 2
Valve Selection ..................................................... 2
Backwash/Blow-Down/Drain Valve ..................... 3
Electric Actuators ................................................. 3
Pneumatic Actuators ............................................ 3
Differential Pressure Switches .......................................... 4
Switch Description................................................ 4
Mounting, Piping and Wiring ............................... 4
Adjustment........................................................... 4
Control Panel ..................................................................... 5
Description ........................................................... 5
Cycle Time Sequence............................................ 5
Standard Features ................................................ 5
Operating Modes………………………………………………………….. 6
Changing Backwash Timer Settings……………………………….
6
SmartWire-
DT Error Messages……………………………………… 7
System E
rror Messages………………………………………………..
. 7
Electrical Schematic Diagram ........................................... 8
Typical Installation ........................................................... 9
INTRODUCTION
An automatic, self-cleaning strainer requires a control
system to provide flexibility and optimize performance of
the straining operation. A number of standard options
are available or specify a custom designed control
system.
This manual will define the installation requirement,
operation, and maintenance of the Eaton control system.