Underwater LED Light
9, 12 & 18 Watt Submersible, Warm White
LED9WW • LED12WW • LED18WW
Instructions for Operation • Safety • Warranty
Thank you for purchasing an EasyPro submersible LED pond
light. With this warm, white LED light you can make your
fountain glow, illuminate your pond from within, highlight your
waterfall and extend the enjoyment of your water feature in
the evening hours. Lights can be used in the landscape out
of the water or as a submersible underwater light with other
warm white LED or halogen fixtures.
LED9WW/LED12WW/LED18WW Specs:
• Housing type: 316 stainless steel
• LED9WW Lumens per watt: 137
• LED12WW/LED18WW Lumens per watt: 115
• Color Temperature: 2800-3000 K
• Power usage at 12V AC: 9, 12 or 18 watts
• Power cable: 30 ft, bare leads
• Integrated driver
• LED9WW 22° beam angle
• LED12WW/LED18WW 30° beam angle
• 5 year warranty
Safety and Electrical Connections:
1 Always disconnect the electrical supply before handling,
maintaining, repairing or installing any pond equipment.
2 Light(s) must be attached to a 12 volt UL listed magnetic
transformer.
3 Never hook the lights directly to a 120 volt or higher outlet.
4 Connect the transformer only to a 120 volt receptacle that
is protected by a Ground Fault Circuit Interrupter (GFCI).
5 Do not use this product in bathrooms or swimming pools.
6 All electrical work must be performed by a qualified technician. Always follow the
National Electrical Code (NEC) or the Canadian Electrical Code as well as all local,
state and provincial codes. Code questions should be directed to your local electri-
cal inspector. Failure to follow electrical codes and OSHA safety standards may result
in personal injury or equipment damage. Failure to follow manufacturer’s installation
LED12WW
LED18WW
LED9WW
