background image

INTRODUCTION TO HoLeeS-15

Recommended Power For One Subwoofer

B l u e   ( M i n i m u m ) :

If you are powering your sub in this 
range,  it  will  operate  comfortably 
with  zero  strain  or  fatigue.  Power 
ranges  this  low  will  not  damage 
your  speaker,  but  it  wont  capture 
the Subzero full capabilities. 

Y e l l o w   ( O p t i m i z e d ) :

This  zone  represents  the  best 
compromise  between  long-term 
reliability,  high-output  and  low-
distortion. If you are operating your 
subwoofer  in  this  range  you  are 
taking  advantage  of  the  best  low 
distortion and sound quality that the 
Subzero  is  capable  of  delivering 
between the recommended power. 

R e d   ( M a x i m u m ) :

In  this  zone  low-distortion  and 
s o u n d   q u a l i t y   b e c o m e  
compromised.    A  small  amount  of 
SPL can be gained in this zone, but 
only a couple of dB. Remember that 
the  more  you  travel  out  of  the 
recommended  power  range  the 
greater  the  chances  of  failure  and 
warranty rejection. Be wise and use 
extreme caution and care with your 
speakers.

B l a c k   ( D O N ’ T ) :

In  this  zone  the  chances  of  failure 
are  almost  inevitable.  When 
exposed to excessive heat and/ or 
mechanical  stress  the  driver  will 
loose sound quality, SPL and could 
seriously damage the driver or you 
vehicle.

 

SUBWOOFERS  OPERATED  IN 
THIS  ZONE  WILL  NOT  BE 
COVERED BY WARRANTY.

hlshlshlshlshlshlshlshlshls

Legend

Minimum

Optimized

Maximum

Don’t

1000W

1500W

3000W

6000W

8000W

15000W

HoLeeS-15

HoLeeS-12

HoLeeS-10

800-576-7944  www.earthquakesound.com

• 

Sound That Will 

Move

 You

Congratulations and thank you for trusting in us and acquir-

wire. The voice coil is over 3” in winding height and diame-

ing the new HoLeeS Competition subwoofer, another in-

ter which makes it one of the most respected drivers for pro-

credible subwoofer from the mind and soul of Mr. Joseph 

ducing high excursion, not only does it move a lot when you 

Sahyoun  (President  of  Earthquake  Sound).  “I  really 

press on it, it has the electrical force necessary to move it 

worked very hard on this driver for several years now, and 

the distance of the actual voice coil. During movement, this 

wanted to perfect every aspect of the driver before it was re-

driver pulls less current from your amplifier than any other 

leased.  This sub is constructed from the finest parts on the 

speaker on the market. Since it is designed and optimized 

planet;  and  I  mean  it.”  When  it  comes  to  the  surround, 

to have a higher impedance during working periods (reac-

much attention to detail is required to accommodate the 

tive  impedance),  it  will  never  go  into  compression.  The

huge  amount  of  excursion  and  pressure  that  will  be  ap-

“PSP” terminal (patent pending) allows the users to have 

plied. The surround uses Poly-ether Draw, the strongest 

their speaker in 2O, dual 4O or 8O.

and longest lasting material available. When the driver is in 
a long excursion situation, you will not start to see any de-

As you can see, this terminal and the rest of the speaker 

formations or dimples unless the speaker is being pushed 

are the first of their kind and we are extremely proud to be 

to  its  absolute  max  peak.  Unlike  many  subwoofers, 

the brains behind them. Earthquake Sound is a reputable 

HoLeeS’ surround will not deteriorate after a few years of 

manufacturer of high-end home and mobile audio products 

hardcore pounding; the surround has a working life span of 

for over 25 years. You will notice that the engineers and 

10 plus years. This wide surround will easily outlast any 

other  parties  involved  with  the  production  of  these  fine 

other and its many qualities make it the widest, longest last-

subs covered a lot of ground to make sure that every user is 

ing and most reliable surround, period. The driver is con-

satisfied and educated as much as possible. If there is any-

structed with a unique triangular bridge type design. The 

thing that you do not understand  or need help with or if you 

voice coil pushes on the flat piston, not the cone. The cone 

have  comments, please  feel  free  to  contact  us  at  (800) 

is used for assembly purposes only. HoLeeS’ cone is con-

576-7944

 us at [email protected].

nected to the flat diaphragm and its lattice structure in the 
middle, creating the triangular system that removes cone 

Once  again,  we  truly  appreciate  you  and  your  ongoing 

distortion caused by wobbles, found in typical speaker de-

support. Thank you.

signs. Earthquake's HoLeeS uses a voice coil that is built 
with  an  aluminum  bobbin  and military-grade  flat  surface 

 

,

 

 or e-mail

 

Summary of Contents for HoLeeS-15

Page 1: ...fore it was re driver pulls less current from your amplifier than any other leased This sub is constructed from the finest parts on the speaker on the market Since it is designed and optimized planet and I mean it When it comes to the surround to have a higher impedance during working periods reac much attention to detail is required to accommodate the tive impedance it will never go into compress...

Page 2: ...heir amplifier hooked up quickly The PSP terminal allows users to easily wire their speaker according to their amplifiers specs 4 PSP Terminal Patent Pending 4 Fuse Inserts 8 Gauge Speaker Terminals Hex tightening screws 1 2 3 NEW TECHNOLOGIES 800 576 7944 www earthquakesound com Sound That Will Move You The HoleeS subwoofers are all about improving the moving parts design of a speaker Current spe...

Page 3: ...19 482 6mm 16 4 416 56mm 7 2 182 88mm 4 101 6mm DBDrag Outer volume 6 10 Port surface 107 25 sq inch Port length 18 1 2 469 9mm typically wraps around Wall thickness 1 25 4mm Front baffle 2 50 8mm cubic feet 25 635mm 32 812 88mm 22 558 8mm 20 457 2mm 18 1 2 469 9mm 5 127mm DBDrag Port length may vary depending on frequency Specifications are subject to change without notice READ To prevent serious...

Page 4: ... 8 GAUGE 8 GAUGE AMPLIFIER 1 Ohm Parallel 1 2 Ohm 1 Ohm AMPLIFIER Series 2 Ohm AMPLIFIER Normal 1 Ohm 1 Ohm 1 Ohm 1 Ohm The HoLee S subwoofer comes equipped with 2 voice coils dual 1 ohm it can be used in 5 or 2 ohm configurations The terminal comes equipped with fused jumpers please note that center terminals are not operational you must use both terminals S 800 576 7944 www earthquakesound com A...

Reviews: