background image

PART # 304186

EG9815     Revised 06/07

Eagle Foodservice Equipment, Eagle MHC, SpecFAB, and Retail Display are divisions of Eagle Group. ©2007 by the Eagle Group

• 100 Industrial Boulevard, Clayton, Delaware 19938-8903 U.S.A. • www.eaglegrp.com 

• Phone: 302/653-3000 • (Foodservice) 800/441-8440 • (MHC/Retail) 800/637-5100 

• Fax: 302/653-2065

OPERATING INSTRUCTIONS

Cooker/Warmers

These Eagle Cooker/Warmers are designed to be used as Food Warmers or as Light Duty Cookers. For holding
food or cooking at temperatures below 212°F, it is recommended that the unit be used with water in the well. For
cooking above 212°F, unit should be dry.

During initial operation, a little smoke or odor may be detected. This will occur when the coating on the
heating element burns off. This should stop after half hour of operation.

The National Sanitation Foundation requires a minimum temperature of 150°F in the food product.

CAUTION

INSPECT CONTENTS IMMEDIATELY AND FILE CLAIM WITH DELIVERING 

CARRIER FOR ANY DAMAGE.

SAVE YOUR BOX AND ALL PACKING MATERIALS.

YOU ARE RESPONSIBLE FOR DAMAGE TO YOUR UNIT IF RETURNED IMPROPERLY PACKED.

Models #1220CWD-120, 1220CWD-208, 1220CWD-240, 11QCW-120, 11QCW-208, 11QCW-240

 

Summary of Contents for 1220CWD-120

Page 1: ...mperatures below 212 F it is recommended that the unit be used with water in the well For cooking above 212 F unit should be dry During initial operation a little smoke or odor may be detected This will occur when the coating on the heating element burns off This should stop after half hour of operation The National Sanitation Foundation requires a minimum temperature of 150 F in the food product ...

Page 2: ... 1 strain relief 3 1 thermostatic control 4 1 indicator light 5 1 knob 6 1 heat element 120V 208V or 240V Parts List for 11QCW Replacement parts may be purchased through our local Authorized Parts Service Center qty description 1 1 cord plug 120V or 208V 240V 2 1 flanged inlet 120V or 208V 240V 3 1 thermostatic control 4 1 indicator light 5 1 knob 6 1 heat element 120V or 208V 240V 2 ...

Page 3: ... not in use It is recommended that unit be disconnected from power supply by removing plug from receptacle or shutting off power disconnect switch 4 Unit should be operated with feet provided to prevent overheating and damage to countertop or cord Check feet every 30 days to assure they are tight 5 Check cord and plug appearance for damage cracking or deterioration If visible have both replaced by...

Page 4: ... assistance This warranty does not cover any cost associated with maintenance misuse abuse improper installation pilot light adjustments pilot outage improper ventilation adjustments alteration calibration wrong voltage wrong gas voltage or gas conversions resetting of circuit breakers or safety controls overtime charges travel charges on portable equipment mileage in excess of 100 miles operation...

Reviews: