Assembly Instructions For Z-Scale
GMC CCKW 2 ½ ton Tanker Truck
Page 1
Introduced in April 1943 the canvas covered cab version of the CCKW military
truck replaced the earlier metal closed cab type. Over 155,000 of these trucks were
produced. This kit is the fuel tanker version of the CCKW.
Parts Included in the kit:
A. 3D printed chassis
B. 3D printed cab/tanker bed
C. One decal sheet
Required to complete the kit:
Paint - Flat black, flat steel, canvas, glosscoat, dullcoat
and Flat army olive (Testors 1165 or Tamiya XF49)
Glue - Slow setting CA is best.
Tools Required:
1. X-acto knife with a sharp #11 blade.
2. #400 and #600 sandpaper.
www.eaelec.com
Decals Printed in the USA
Made in Canada
WARNING: CHOKING HAZARD
Keep out of reach of small
children!
Note that these ARE NOT TOYS,
AND ARE NOT INTENDED FOR
USE BY CHILDREN UNDER
AGE OF 14. These products are
model railroad equipment and
accessories intended for use by
adults.
