Brief introduction
Many thanks for purchasing Media Converter Chassis! R14 Media Converter
Chassis is a telecommunication-level product, designed as supporting
equipment for communication engineering, a highly integrated central
equipment with the length of 19 inch and height of 2U. Maximum 14 sets of
10M, 100M, 10/100M, 1000M multimode, single mode media converters can be
installed in one chassis under uniform power supply. This not only reduces the
number of tie wires and simplifies the structure, but also facilitates easy
management and maintenance.
Purchasing guide for media converter chassis
Model
Specifications
R14-1-A
14 slots, sing power supply, AC220V 19’’2U
R14-2-A
14 slots, double power supply, AC220V 19’’2U
R14-1-D
14 slots, sing power supply, DC 220V 19’’2U
R14-2-D
14 slots, double power supply, DC220V 19’’2U
Packing list
Please check the following items in the package before installing the media
converter.
Media Converter Chassis
1set
Power line
1pcs
User manual
1copy
Please contact the dealer immediately for any loss or damage to the above
items.
Feature
1. 14 slots standard 19Inch2U casing can be installed in the cabinet of
equipment room for uniform management and maintenance.
2. Dual fans for air exhaust, excellent thermal diffusivity.
3. Supports plug-and-play of optical transceiver.
4. Well shielded power supply prevents electromagnetic signal caused by
power supply from intervening the normal operation of module.
5. Optional switching power supply supports stable and long time operation,
provides overvoltage and over current protection, with ripple and noise less
than 50mV.
Installation
1.
Put this set into the standard cabinet. According to your needs, insert
Fast
Ethernet Media Converter with outside power supply in the slots. And
remanent empty slots please cover with front panel.
2.
Insert one end of the electric power cord in the power behind this chassis,
insert another end in 220V exchange power of (connect DC48V to
DC48V).
3.
Open the switch on the back of the chassis (double switches need to open
the both switches), the power indicator lamp on the back plate is bright at
this moment, the chassis begins to work
