background image

1.  IMPORTANT SAFETY INSTRUCTIONS 

SAVE THESE INSTRUCTIONS.

WARNING – RISK OF EXPLOSIVE GASES.

WORKING IN THE VICINITY OF A LEAD-ACID BATTERY IS 

DANGEROUS. BATTERIES GENERATE EXPLOSIVE GASES 

DURING NORMAL OPERATION. IT IS IMPORTANT THAT YOU 

FOLLOW THESE INSTRUCTIONS EACH TIME YOU USE THE UNIT.

To reduce the risk of battery explosion, follow these instructions and 

those published by the battery manufacturer and the manufacturer 

of any equipment you intend to use in the vicinity of a battery. 

Review cautionary markings on these products and on the engine.
WARNING! RISK OF ELECTRIC SHOCK OR FIRE.

1.1  Read the entire manual before using this product. Failure to do so 

could result in serious injury or death.

1.2  Keep out of reach of children.

1.3  Do not put fingers or hands into any of the unit’s outlets.

1.4  Do not expose the unit to rain or snow.

1.5  Use only recommended attachments (SA901 jump cable).

 

Use of an 

attachment not recommended or sold by the jump starter manufacturer 

for this unit may result in a risk of fire, electric shock or injury to persons 

or damage to property.

1.6  To reduce the risk of damage to the electric plug or cord, pull by the 

adaptor rather than the cord when disconnecting the unit.

1.7  Do not operate the unit with damaged cables or clamps.

1.8  Do not operate the unit if it has received a sharp blow, been dropped or 

otherwise damaged in any way; take it to a qualified service person.

1.9  Do not disassemble the unit; take it to a qualified service person when 

service or repair is required. Incorrect reassembly may result in a risk of 

fire or electric shock. 

1.10 Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate 

this device. 

WARNING! RISK OF EXPLOSIVE GASES.

1.11 To reduce the risk of a battery explosion, follow these instructions and 

those published by the battery manufacturer and the manufacturer of 

any equipment you intend to use in the vicinity of the battery. Review 

the cautionary markings on these products and on the engine.

Jump Starter/Power Pack

OWNER’S MANUAL

PLEASE SAVE THIS OWNERS MANUAL AND READ BEFORE EACH 

USE. This manual will explain how to use the unit safely and effectively. 

Please read and follow these instructions and precautions carefully.

MODEL

 

DL-2000LI

0099002240-00

Summary of Contents for DL-2000Li





















Reviews: