background image

S S 

Digital  witching  ystems Australia

S

S

 A 

D

Combo 64

(Part No. DSS-CBO64)

When

        Safety

              Matters

The Combo 64 is an advanced safety device aimed to simplify, control 
and warn a driver in case of a problem.

It utilises the latest digital, micro controller technology to ensure 

reliability and performance.
 
It allows for automatic control of preset devices inside the cabin of a 
vehicle. 

Utilising six inputs and four outputs, the Combo 64 can automatically 
warn a driver that the hand brake is not on, can turn on DRL’s as a 
preset function, turn beacons on and has many more applications.

(Part No. DSS-CBO64)

The Combo 64 is an advanced safety device aimed to simplify, control 
and warn a driver in case of a problem.

It utilises the latest digital, micro controller technology to ensure 

reliability and performance.
 
It allows for automatic control of preset devices inside the cabin of a 
vehicle. 

Utilising six inputs and four outputs, the Combo 64 can automatically 
warn a driver that the hand brake is not on, can turn on DRL’s as a 
preset function, turn beacons on and has many more applications.

- Beacon Conrol

- Spare Output

- D.R.L Control

- Park Brake Alarm

Summary of Contents for Combo 64









Reviews: