![background image](http://html1.mh-extra.com/html/dsb/330-arp/330-arp_instruction-manual_2534148001.webp)
330ARP
After the laminator has been turned on using the tempera-
ture transfer switch located on “0” position, the cold mode
is automatically set. If the machine has just recently been
used for hot lamination, then the machine must reach a
temperature of no more than 25 before starting cold
lamination.
C
WARNING
:
For your protection, do not connect the pouch laminator to electrical
power until you read this instruction completely. Keep this instruction in a
convenient location for future reference.
Model No:330 ARP
A3 LAMINATOR
Heating system Hot shoe + heating plate
Laminating type
Cold & hot laminating
Laminating speed
750~800mm/min
Laminating thickness 1mm
Warm up time
3~3.5min
Roller quantity
4
Max. entrance width 330mm
Available thickness 75~250mic
1.
4.
I n s t r u c t i o n M a n u a l
COLD Lamination
Cautions item:
Cleaning
Service:
Technology data
1. Select a no-heat laminate that is slightly large than the document to be laminated.
2. Run the film, film-side faced up, for about 3~6mm into the laminator, and then press POWER BUTTON
to stop the rollers.
3. Carefully separate the baking release paper from the film, and drape the clear film over the top of the
laminator.
4. Place the document between the separated film and backing.
5. Then press the power switch to finish laminating.
To ensure safety and prevent serious accidents, such as crispate of pouch or fire, please obey the
following steps completely.
1. To avoid the danger of electrical shock, keep the machine away from water sources or any wet
conditions.
2. Do not laminating items such as Drawings on the heat-sensitive paper or matter whose color or
quality is prone to change when heating.
3. Interlayer which is thicker than 1.0 mm is not suitable for lamination.
4. The pouches shouldn’t be large than A3 paper.
5. Do not laminate easy melting, sticky objects and object too soft as well as thinner paper.
6. For prolonging the roller’s life, you should revolve the
Temperature transfer switch
to “0”
position after finished hot laminating and turn off the
power switch
about ten minutes later.
Warning
:
please make sure that the machine has been turned off and unplugged before cleaning.
As to the smutch on the covers of the machine, please wipe them off by cloth.
Do not attempt to service or repair the pouch laminator yourself. Unplug the unit and contact an
authorized service representative for any required repairs.
。
330ARP
330ARP
baking release paper
document
film draped
the laminator
(see Fig-3)
(see Fig-3)
Содержание 330 ARP
Страница 2: ......