Dromex: Unit 1, 1 Blase Road, New Germany, 3620, South Africa
T. +27(31) 713 1960 E. [email protected]
www.dromex.co.za
(HARD HAT ASSEMBLY) CARRIER
Description
The Dromex® HHA carrier system is a universal helmet mounted face shield
and earmuff combination that’s easy to attach and detach, provides optimum
hearing and face protection against liquid splash, medium impact particulate,
molten metal and resistance to penetration of hot solids.
Compatible with most industrial helmets, these combination earmuffs and
faceshields are suitable for use in construction, general industry, mining, oil
and gas, utilities airports, excavation equipment handling, generators,
machining, grinding, woodwork and drilling applications.
Special Instructions
EARMUFFS:
• Do not share
earmuffs
as ears can be exposed to ear infections.
• Product should be worn properly at all times in noisy surroundings.
• The earmuffs should be fitted, adjusted and maintained in accordance with
instructions provided on this packaging.
• If the recommendations are not adhered to, the protection afforded by the
product will be severely impaired.
• This product may be adversely affected by certain chemical substances;
avoid the use of agents (i.e. solvents and other disinfectants) that are known
to be harmful to the wearer and/or the earmuff.
• Regularly inspect for tears or cracks and replace if service ability is suspected
to be affected.
• Sounds above 85dB are harmful to the ears.
• Spectacle frames and hair between the ear pad and head may affect the
performance of the ear protector.
VISOR:
• This eye protector is suitable for use to the lowest marking on the brow guard
or visor. Clear material face shields are not intended for welding use.
Safety spectacles with side shields are used as primary protection to shield the
eyes from heat hazards. To adequately protect the eyes and face from high
temperature exposure, use safety spectacles in combination with a heat
protective face shield. Only shade 5 green material face shields are suitable for
welding use. Wire mesh face shields are not suitable for protection against
high speed particles, liquid splash, molten metal splash, hot solids, electrical
hazards, furnace or welding use.
• Optical class 3 oculars are not intended for long term use.
Compliance & Conformity
Manufactured to EN 352-1:2002 and EN 352-3: 2002, Hearing Protective
Equipment, CE certificate 676978 and EN166:2001 and EN 1731:2006,
Personal Eye Protection: Face shields, CE certificate 682750 as per the
requirements of Eu Type examination certificate, 2016/425 Directive
89/686/EEC by BSI.
Specifications
Style:
Helmet mounted detachable face shield and earmuffs
with adjustable cups
Earmuffs:
• Material earcup: ABS (Acrylonitrile butadiene styrene)
earmuff cup with a foam cushion and soft leather skin
covering
• Material earmuff helmet connector: POM
(Polyoxymethylene), nylon and glass filled polymer
housing, with a steel screw
• Noise attenuation data: SNR 28 dB
H 31 dB
M 26 dB
L 19 dB
Material visor:
• Material Visor consists of polycarbonate, 1mm thick
• Markings on visor:
EN 166: 2001, 1.B.9, Z87+
1 = ± 0, 06 DIOPTRES PERMANENT WEAR
B = Medium Energy high speed particles 120m/s
9 = Areas of use, Molten Metals and hot solids
Material carrier:
• Material HHA carrier: ABS (Acrylonitrile butadiene
styrene)
• Markings on carrier frame:
EN 166: 2001, 1.B.9, Z87+
1 = ± 0, 06 DIOPTRES PERMANENT WEAR
B = Medium Energy high speed particles 120m/s
9 = Areas of use, Molten Metals and hot solids
3 = Suitable for protection against liquid droplets
Packaging, Storage & Obsolescence
• Interex Earmuffs packed in individual boxes and sold as 10 units in a carton.
• HHCARRIER packed in individual polybags and sold as 20 units in a carton.
• HHPCVISOR wrapped in individual packaging and sold as 20 units in a carton.
HHA CARRIER
EARMUFFS:
User’s instructions included in the polybag.
When not in use or during transportation, the earmuff should be stored in a
container such that it out of direct sunlight, away from chemicals and abrasive
substances and cannot be damaged by physical contact with hard surface
and items.
VISOR:
User’s instructions included in the polybag.
When not in use or during transportation this face shield should a container
that is out of direct sunlight, away from chemicals and abrasive substances
and cannot be damaged by physical contact with hard surfaces/items.
Do not store outside temperature range of -20"C to +50°C or with humidity
above 90%RH.
Cleaning & Maintenance
EARMUFFS:
After each use wash and rinse with warm soapy water.
Clean and dry earmuffs when not used for a long period of time.
Solvent or abrasive cleaner should not be used.
Cushions may deteriorate with use and should be examined at frequent intervals
for cracking and tears.
Discard immediately when headband is broken, cups are damaged and cushions
are missing, as the earmuff can no longer provide full hearing protection.
VISOR:
To maintain the face shield in the best possible condition do not use solvents or
abrasive materials to clean.
Rinse in a weak solution of mild detergent in clean water and dry with a soft cloth.
Scratched or damaged visors should be replaced. Replacement visors are available.
Should any difficulties be encountered, connecting or disconnecting the face-
shield, contact the manufacturer.
Shelf life
• Under normal circumstances the earmuff should offer adequate protection
for 2 -3 years.
• Discard if noticeable damages is prevalent
• Visor :
• Under normal circumstances the face shield should offer protection for up to
5 years.
Materials
None of the materials used in the manufacture of the HHA system are known
to adversely affect the hygiene or health.
