PERCHING STOOL (PS001)
The perching stool is suitable as a seat to provide
support when doing household tasks such as
ironing, DIY, etc. The weight limit on the
perching stool is 120kg (19 stone).
It is constructed from strong tubular steel and
has a comfort padded seat and back rest.
The stool has vinyl upholstery which can be
wiped clean with a damp cloth.
TO USE THE STOOL
Place on the floor then slide the front and rear
legs apart. Flip down the chrome ‘P’ shaped bar
(arrowed on photo below) to lock the legs apart.
Fold down the seat and the stool should look like
the photograph (left).
TO FOLD UP THE STOOL
Flip up the chrome ‘P’ shaped bar (arrowed)
Lift up by the top of the stool and back leg should
naturally fold in. Flip up the seat for storage.
TO ADJUST THE SEAT HEIGHT
The perching stool has a number of predrilled
holes to allow seat height adjustment without
tools. To adjust the seat height, turn one of the
tristar knobs anticlockwise until released.
Remove the knob and repeat for the other side.
Adjust the seat to the desired height, then
reinsert one of the knobs and turn clockwise to
secure. Repeat for the other side.
WARRANTY
The device is covered by a one year warranty
from date of purchase which covers design and
manufacturing defects. It does not include
accidental damage, wear and tear or use error.
Drive DeVilbiss Healthcare
Birkenshaw, BD11 2HW, GB
IFU Issued 02/18
Summary of Contents for PS001
Page 2: ......
