![background image](http://html1.mh-extra.com/html/draper/cril-cob-bl/cril-cob-bl_instructions-manual_2528005001.webp)
INSTRUCTIONS FOR
2W COB + 1W LED
Rechargeable Inspection Lamp
Stock Nos.82679
Part Nos. CRIL/COB/BL
82684
CRIL/COB/OR
82685
CRIL/COB/GR
82688
CRIL/COB/YW
IMPORTANT:
PLEASE READ THESE INSTRUCTIONS CAREFULLY TO ENSURE THE SAFE AND
EFFECTIVE USE OF THIS PRODUCT.
GENERAL INFORMATION
These instructions accompanying the product are the original instructions. This document is part of the product, keep it
for the life of the product passing it on to any subsequent holder of the product. Read all these instructions before
assembling, operating or maintaining this product.
This manual has been compiled by Draper Tools describing the purpose for which the product has been designed, and
contains all the necessary information to ensure its correct and safe use. By following all the general safety instructions
contained in this manual, it will ensure both product and operator safety, together with longer life of the product itself.
AlI photographs and drawings in this manual are supplied by Draper Tools to help illustrate the operation of the product.
Whilst every effort has been made to ensure the accuracy of information contained in this manual, the Draper Tools
policy of continuous improvement determines the right to make modifications without prior warning.
1. TITLE
PAGE
1.1 INTRODUCTION:
USER MANUAL FOR:
2W COB +1W LED RECHARGEABLE INSPECTION LAMP
Stock nos. 82679, 82684, 82685, 82688.
Part no. CRIL/COB/BL, CRIL/COB/OR, CRIL/COB/GR, CRIL/COB/YW.
1.2 REVISIONS:
As our user manuals are continually updated, users should make sure that they use the very
latest version.
Downloads are available from: http://www.drapertools.com/b2c/b2cmanuals.pgm
DRAPER TOOLS LIMITED
WEBSITE:
www.drapertools.com
HURSLEY ROAD
PRODUCT HELPLINE:
+44 (0) 23 8049 4344
CHANDLER’S FORD
GENERAL FAX:
+44 (0) 23 8026 0784
EASTLEIGH
HAMPSHIRE
SO53 1YF
UK
1.3 UNDERSTANDING THIS MANUALS SAFETY CONTENT:
WARNING!
Information that draws attention to the risk of injury or death.
CAUTION!
Information that draws attention to the risk of damage to the product or
surroundings.
1.4 COPYRIGHT © NOTICE:
Copyright © Draper Tools Limited.
Permission is granted to reproduce this publication for personal & educational use only.
Commercial copying, redistribution, hiring or lending is prohibited.
No part of this publication may be stored in a retrieval system or transmitted in any other
form or means without written permission from Draper Tools Limited.
In all cases this copyright notice must remain intact.
Date first published July 2015
2. CONTENTS
4
2
2.1 CONTENTS
Page content
Page
1 TITLE
PAGE
1.1
INTRODUCTION
...............................................................................................2
1.2
REVISION
HISTORY...........................................................................................2
1.3
UNDERSTANDING THIS MANUAL ..................................................................2
1.4
COPYRIGHT
NOTICE .........................................................................................2
2 CONTENTS
2.1
CONTENTS ........................................................................................................3
3 GUARANTEE
3.1
GUARANTEE .....................................................................................................4
4 INTRODUCTION
4.1
SCOPE ...............................................................................................................4
4.2
SPECIFICATION .................................................................................................4
4.3
HANDLING & STORAGE ...................................................................................4
5
HEALTH & SAFETY INFORMATION
5.1
GENERAL SAFETY INSTRUCTIONS ...................................................................5
5.2
CONNECTION TO THE POWER SUPPLY (CHARGER) .......................................6
6 TECHNICAL
DESCRIPTION
6.1
IDENTIFICATION ...............................................................................................6
7 UNPACKING
&
CHECKING
7.1
PACKAGING......................................................................................................6
8
PREPARING THE INSPECTION LAMP
8.1
CHARGING ........................................................................................................7
9
OPERATING THE INSPECTION LAMP
9.1
OPERATION ......................................................................................................7
10 MAINTENANCE ...................................................................................................................7
11
EXPLANATION OF SYMBOLS
11.1
EXPLANATION
OF
SYMBOLS ...........................................................................7
12 DISPOSAL
12.1
DISPOSAL ..........................................................................................................7
DECLARATION OF CONFORMITY .................................................................................... ENCLOSED
3
Draper tools have been carefully tested and inspected before shipment and are guaranteed to be
free from defective materials and workmanship.
Should the tool develop a fault, please return the complete tool to your nearest distributor or
contact Draper Tools Limited, Chandler's Ford, Eastleigh, Hampshire, SO53 1YF. England.
Telephone Sales Desk: (023) 8049 4333 or Product Helpline (023) 8049 4344.
A proof of purchase must be provided with the tool.
If upon inspection it is found that a fault occurring is due to defective materials or workmanship,
repairs will be carried out free of charge. The guarantee period covering parts/labour is 12 months
from the date of purchase. This guarantee does not apply to normal wear and tear, nor does it
cover any damage caused by misuse, careless or unsafe handling, alterations, accidents, or repairs
attempted or made by any personnel other than the authorised Draper warranty repair agents.
Note: If the tool is found not to be within the Terms of Warranty, repair and carriage charges will
be quoted and made accordingly.
This guarantee applies in lieu of any other guarantee expressed or implied and variations of its
terms are not authorised.
Your Draper guarantee is not effective unless you can produce upon request a dated receipt or
invoice to verify your proof of purchase within the guarantee period.
Please note that this guarantee is an additional benefit and does not affect your statutory rights.
Draper Tools Limited.
3. GUARANTEE
3.1 GUARANTEE
4. INTRODUCTION
4.1 SCOPE
2 watt Chip On Board (COB) and 1W LED rechargeable inspection lamp, 2W COB to be used as an
inspection lamp and 1 LED for use as a torch. Magnets on the base and on the rear, a 360° swivel
hook. Base pivots 180°, supplied with mains charger, connection lead and 12V charger.
4.2 SPECIFICATION
Stock nos.......................................................................................................82679, 82684, 82685, 82688.
Part nos. ........................................................... CRIL/COB/BL, CRIL/COB/OR, CRIL/COB/GR, CRIL/COB/YW
Battery:
Type ............................................................................................................................................... Li-Ion
Rated Voltage ................................................................................................................................ 3.7V
Rating ........................................................................................................................................... 2.0Ah
Charger:
Rated Voltage ............................................................................................................................. 230V~
Rated Frequency ........................................................................................................................... 50Hz
Rated Power Input .......................................................................................................................... 8W
Rated D.C. Output Voltage ........................................................................................................ 5V DC
Rated D.C. Output Current ..................................................................................................... 1000mA
Construction ............................................................................................................................... Class II
Charging time.................................................................................................................... 4 hrs (approx.).
Lamp operating time:
2W COB LED inspection lamp....................................................................................... 3 hrs (approx.).
1W LED torch................................................................................................................. 8 hrs (approx.).
Lamp luminosity:
2W COB inspection lamp ....................................................................................................150 lumens.
1W LED torch.........................................................................................................................70 lumens.
4.3 HANDLING & STORAGE
Do not drop the inspection lamp as this can damage and shorten the life span of the unit.
Store in a dry location as damp conditions can damage the inspection lamp.
Charging on a regular basses in advised to prolong the life of the battery cells.