6
7
The keypad is approved by the FCC and it complies with Part 15 of the FCC Rules. Its
operation is subject to the following 2 conditions:
1. This device may not cause harmful interference.
2. The device must accept any interference that may cause undesired operation.
WARNING:
Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
FCC ID: SU7KEYDOL300310
If, within two years from date of purchase, this product should become defective
(except battery), due to faulty workmanship or materials, it will be repaired or replaced,
without charge. Proof of purchase and a Return Authorization are required.
Thank you for your purchase of the Community Controls Dolphin
wireless keypad. The KEYTS300/310 will accomodate one 4 digit PIN
to activate a signal transmission.
Package contains:
Keypad
9 volt battery
2 wall anchors
Keypad instructions
Please follow the detailed instructions below in order to set up the Dolphin keypad to
operate with your garage door opener or receiver.
DO NOT let children use the keypad without adult supervision. Children can injure
themselves, or others, if left unsupervised. Make sure all the required safety devices are
installed before operating any door.
If this transmitter triggers other doors in your neighborhood, change all your transmitters
and receivers to a new code setting.
5
2.
OPERATIONAL FEATURES
Keypad Instructions
Dolphin Wireless Garage Door Keypad
Dual Frequency 300/310 MHz
Product # KEYTS300/310
Pressing any key illuminates the keypad for 5 seconds.
A "buzzer" indicates each button depression.
After 20 incorrect key entries, the keypad will “lock up” for 40 seconds.
If the battery is low the LED flashes rapidly for 5 seconds, indicating it is time to
replace the battery.
After you have entered a valid code, the LED will flash during the 5 second "time
out" period. During the “time out” period you may press any key and the keypad
will send another signal to your receiver each time you press a key.
The key resets your entry. If you make a mistake while entering your PIN,
pressing the key resets your entry so you can start over.
HINT: If you always begin your PIN with the you will reduce the likelihood of
faulty operation
