![background image](http://html1.mh-extra.com/html/digital-projection/titan-quad-1080p-3d/titan-quad-1080p-3d_specifications_2499413001.webp)
O v e r v i e w
P E R F O R M A N C E S P E C I F I C A T I O N S
Brightness (±10%)
TITAN Quad 1080p-3D:
up to 16,000 ANSI Lumens
TITAN Quad Reference 3D:
up to 8,000 ANSI Lumens
Contrast Ratio
(±10%)
TITAN Quad 1080p-3D:
2000:1
TITAN Quad Reference 3D:
up to 5000:1
Display Type
.95” Darkchip DMD
DMD Specification
1920 x 1080 pixels native, +/-12 deg tilt angle
Fast transit Pixels for smooth greyscale and improved contrast.
Fill Factor
87%
Sealed Optics at DMD™ Interface
Protects DMD’s™ from optical contamination
Source Compatibility
Advanced Front End Processor:
• 3GSDI including 1080p 60fps, 24p (4:4:4 and 4:2:2) and 1080i.
• HDMI including Deep Color processing.
• Graphics standards up to 1920 x 1080 resolution at 60fps via DVI
or VGA.
• Component video (SD and HD) via YPr Pb, RGB, or RGBS.
• S-Video (PAL, NTSC & SECAM)
• Composite Video (PAL, NTSC & SECAM).
High bandwidth, pixel mapped path:
• Dual DVI accepts graphics standards up to 1920 x1200@120fps.
• HDMI 1.4 including 3D Standards
• Dual Pipe (2 x DVI or HDMI)
High Bandwidth Input
• 3D capable
• Pixel Mapped - with low latency
• FastFrame™ Motion Blur Reduction
• 120 Hz with no frame doubling
3D Sync
Sync In - External lock
Sync Out - Shutter glass control
Network Connection
IR handset with wired option via 3.5mm jack (with loop through).
LAN Via RJ45 with full feature set via protocol.
Duplication of OSD served from projector controller via RJ45.
RS232 Via 9 Pin connector.
Lamp Type
Four x 400W High Intensity Discharge
Lamp Life
(typical)
1
Full Power: 1500 hrs (up to 3000 hrs in lamp sequential mode)
Eco Mode : 2000 hrs (up to 4000 hrs in lamp sequential mode)
Intelligent Lens Mount
Motorised and programmable Focus, Zoom, and Vertical
and Horizontal offsets with ten positional memory banks.
Lens Shift (maximum)
Fixed 1.2:1 and Zoom Lenses:
• Vert: +0.7, -0.5 frame; Hor: ±0.1875 frame
0.73 Fixed lens:
• Vert: ±0.11 frame; Hor: ±0.07 frame
Lens Options
0.73 :1 fixed
2.02-2.77
:1 zoom
1.2
:1 fixed
2.77-4.51
:1 zoom
1.26-1.61 :1 zoom
4.51-7.53
:1 zoom
1.5-2.02
:1 zoom
7.5-11.2
:1 zoom
• 1.2:1 Lenses include manual aperture
• High-contrast lenses available for 0.73:1
and all zoom lenses
Specifications subject to change without notice DP V1.0 09/2011 ©2011 Digital Projection, Inc.
™DLP, Digital Light Processing and DMD are trademarks of Texas Instruments, Inc.
TITAN Quad Series - Home Cinema
T I T A N Q u a d 1 0 8 0 p - 3 D • T I T A N Q u a d R e f e r e n c e 3 D
Mechanical Mounting
• Front or rear table; Front or rear ceiling
(ceiling mount optional)
• Rugged, staging tolerant chassis with
integrated handles
• Optional RapidRig™ frame with integrated
pitch, roll and yaw adjustments
Weight (chassis only)
39 kg, 86 lbs
Video Processing: Advanced Front End processor:
• ColorMax
Each projector is accurately calibrated at the fac-
tory with its native primary colors and white point
being stored in the on-board memory. User’s choice
to employ the external control application to download
his own measured color space, as specific to the oper-
ating environment, and also his preferred Target color
space for primary and secondary colors. Not only is
this the most flexible color management technology
available, but it also enables accurate matching of pro-
jectors in tiled or blended applications.
• Dual Flash Processing can be used to multiply the
displayed frame rate for 3D sources.
• FastFrame motion blur reduction.
• Dual Pipe processing allows the delivery of two
sources in parallel, typically one for the Left Eye and
the other for the Right.
• De-interlacing, Video enhancement and Frame Delay
The projector automatically detects interlaced video
and implements 3:2 or 2:2 extraction as appropriate,
with pixel based, motion adaptive interpolation and
auto cadence correction.
• PIP/POP/PAP
o User’s choice between inputs for the main and
sub images (Picture in Picture or PIP). The processing
additionally offers the option to display two sources,
side-by side, scaled to the vertical size of the panel
Picture and Picture or PAP), or alternatively maintain-
ing their original aspect ratios (Picture Opposite Picture
or POP).
TITAN Quad displays also contain the following
capabilities for specialized applications:
• Advanced geometry correction:
o Accurate warp map generation by adjustment of
an interpolated grid array of up to 16 x 16 nodes. Up to
eight maps can be generated, downloaded and stored on
the projector for selection via the OSD or control applica-
tion.
o On board implementation of Pincushion & Barrel,
Cornerstone, Vertical & Horizontal Keystone, and Image
Rotation.
• High Quality Edge Blending & Multi Projector Tiling
o High bit depth processing in blend region to ensure
smooth image.
o Adjustable S-Curve Parameter and degamma func-
tions.
o Black Level Uplift to ensure uniformity across blend
in dark images.
o Correction of black level uplift to compensate for
non-active pixels at the edge of the DMD.
o The user can choose to assign the projector a posi-
tion within an image matrix. The video processing can
automatically extract the appropriate segment of the input
image and enable blending for the appropriate edges.
• Single Stage Scaling
o Resizing and Warp functions are carried out in a
single stage process maximizing the clarity of the result-
ing image. When operating Blend in conjunction with
Warp the processing will automatically superimpose the
warped-blend map, onto the geometrically corrected
image.
I N P U T C A P A B I L I T I E S
Type
Composite
S-Video
HDMI (HDCP compliant)
Component
Interlaced/Std def Y, Cr/Pr, Cb/Pb, S
Graphics
Progressive RGB/Progressive Interlaced Hi def
Y, Cr/Pr, Cb/PB
RGBHV (Progressive)
Digital RGB
Serial Digital
SD/HD-SDI (SMPTE 259M/292M)
DVI - High bandwidth
Dual - main
Dual - sub
*The main & sub dual DVI inputs can be used in
parallel to support dual-pipe 3D connectivity
Connector
BNC
4-pin mini DIN
HDMI 1.4
BNCx4
BNCx5
D sub (15-pin)
DVI
BNC
DVI
DVI
Quantity
1
1
2
1
1
1
1
1
1
1
Digital Projection International presents a revolution in advanced 3-chip
3D DLP displays with the new TITAN Quad product line. Incredibly
compact and efficient for such brightness capabilities, the TITAN Quad
series incorporates DP’s active 3D connectivity, Intelligent Lens Mount,
ColorMax calibration technology, and a host of advanced features to
suit any large-screen entertainment space imaginable.
With a brightness range of 8,000 to 16,000 lumens, and contrast up to
5000:1, the TITAN Quads have broken through the 3D projector bright-
ness barrier in incomparable fashion. As efficient as they are powerful,
the introduction of the new TITAN Quad lineup marks the world’s first
projectors of this brightness, in a chassis with such a small form factor.
Incorporating the latest in Texas Instruments’ Darkchip 1080p DLP®
technology, the TITAN Quad represents the new flagship of DPI’s TITAN
product line, which now encompasses over 30 3D-capable precision
displays.
All TITAN Quad models enlist DPI’s exclusive 3D advances, including:
• High Bandwidth input >120Hz active stereoscopic DVI with no need
for frame doubling. This capability extends the dynamic range up to 16
bit for improved< contrast and color gamut.
• Dual Flash Processing™ (DFP) – Enables distribution of 3D content
via 60 Hz formats by providing the option to frame-double the signal
within the projector. When this option is selected, the input signal, hav-
ing been processed and re-sized to map to the native resolution of the
projector, will also be frame-doubled to 120 Hz, and the doubled frames
interleaved. This produces imagery with the low flicker characteristics of
a native 120 Hz source, but without the infrastructure costs associated
with distributing and switching ultra-high bandwidth signals.
• Projector electronics which provide an interface to drive an infrared
transmitter to synchronize switching glasses with active displayed
frames. The user can elect either to pass through an external sync
pulse, or to use the reference generated internally by the projector.
Adjustments are provided to accommodate the phase and dead time
characteristics of different switching glasses.
• FastFrame™ technology, a revolutionary combination of hardware
and firmware that provides user adjustments to vastly reduce the arti-
facts and image blur typically associated with rapidly moving display
content.
• For installations using curved screens, all TITAN Quad models pro-
vide the user with advanced Warp and Blend capabilities, including the
ability to make extensive geometric warp correction for screens with
complex geometry.
As is the case with all Digital Projection displays, our careful engineer-
ing guarantees TITAN projectors provide remarkable resolution, color
saturation and light output for years to come. Equally important, DPI’s
legacy in providing superior customer and technical services assures
our experienced support staff is always available to address your needs.
TITAN Quad 1080p-3D displays... now, Four is More.
1080p-3D