![background image](http://html1.mh-extra.com/html/dice/dcr-150/dcr-150_installation-manual_2494813001.webp)
Table of contents
Compatible iPod & iPhone
G2 cradle DCR-150 contents
Choose the correct holder
Installation
Mounting option
Installation Guide/User Manual
Model: DCR-150-USB
USB cradle for iPod & iPhone
Disclaimer and warranty
Compatible iPod & iPhone
G2 cradle contents
Choose the correct holder
Installation
Mounting option
Connect the cradle
Long base installation
Adjusting the angle
......................................1
...................................2
...............................................3
....................................4
............................................................5
....................................................6
...............................................7
...........................................8
...............................................9
Connect the Cradle
Long base Installation
Adjusting the angle
1
3
4
5
6
7
8
9
DICE G2 cradle
additional holders x6
mounting screws x4
USB mini B connector x1
USB type B
connector
Optional cable
Left
Right
Video*
Factory or Aftermarket
radio with USB iPod port
long base x1
DCR-150 cradle
with regular base and
iPhone 4 holder x1
iPhone
0609r1
Compatible iPhone/iPod model can be found here.
Each holder is designed for a different
iPhone/iPod model. Identify the holder
by the printed text on the back of the
holder and choose the correct holder
for your iPhone/iPod.
Slide the correct holder
onto the cradle until it
clicks.
Slide the iPhone/iPod
into the holder
These holes are designed to fit
vehicle mounts from iGrip
TM
.
These holes are designed to allow you to
screw the cradle base to AMPS standard
mounts (ProClip
TM
, Kuda
TM
, etc).
Use the mounting screws (x4)
included with the G2 cradle to
screw the cradle to AMPS standard
mounts.
USB mini B
connection
USB cigarette
lighter charger
DICE Media Bridge or
FM-RDS USB Pro
If the long base will fit your car interior more appropriately than the short one,
then please follow the illustration to attach the long base to the cradle. Turn the
base clockwise to tighten the base to the cradle.
To adjust the angle of the cradle, first slide
off the holder, then loosen the set screw
enough for the cradle to move freely. When
you are done adjusting the angle, hold the
base and tighten the set screw, and slide
the holder back to its place. DO NOT
OVER TIGHTEN!
set screw
nylon washer
cradle
long base
metal
washer
Important disclaimer, please read!
Unauthorized reproduction or reverse engineering is strictly prohibited! Intellectual property included is distributed under specific license
agreement with respective owners and is licensed only, not sold. No warranty, explicit or implied, is stated. Neither DICE Electronics, LLC., nor
any of its agents, distributors, dealers or vendors shall be liable for damages.
IN NO EVENT SHALL DICE ELECTRONICS' LIABILITY EXCEED THE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THE PRODUCT, ITS ACCOMPANYING
SOFTWARE OR ITS DOCUMENTATION.
For internal use only.
Do not submerge or expose to water or other fluids. DICE G2 cradle is NOT water proof and it will be damaged by water.
You must properly insulate its casing if your installation environment may subject the unit to water, such as a convertible vehicle.
Keep away from children!
DICE G2 cradle can be broken, or disassembled, and components may become loose from vibration and heat.
Small components and packaging materials may become choking hazard when handled by children.
Warning!
Never place any objects directly into the path of an airbag. DICE Electronics does not accept any responsibility for any damage or
injury as a result of using this product. Exercise good judgment and keep your eyes on the road at all times!
DICE logo is a trademark of DICE Electronics, LLC. Kuda is a trademark of KUDA Group. iGrip is a trademark of HR GmbH & Co. KG. ProClip
is a trademark of ProClip USA Inc. The Made for iPod logo is a trademark of Apple Inc. The Works with iPhone logo is a trademark of Apple Inc.
Apple iPod is not included in the package.
Warranty and Support
If you experience any problems or need help, please contact you local dealer or call DICE Electronics, LLC. At 888-342-3999 or visit us at
http://diceelectronics.com/product-support
Products carry a 1 year limited warranty that protects you from defects in material and workmanship of products sold by DICE Electronics or its
authorized agents, distributors and dealers. The warranty period begins the day a product is purchased by the end user. Products found to be
defective during the warranty period will either be repaired or replaced by DICE Electronics at no charge unless warranty is void. Unauthorized
attempt of repair or alteration of the product in any way immediately voids this warranty. Warranty does not extend to cosmetics or finish. A DICE
product specialist must determine that a defect is present in the product and issue an RMA. Be sure that all wiring is connected as described
in the user manual and all related equipment is functioning properly. DICE Electronics disclaims any liability for other incurred damages
resulting from product defects. Any expenses in the removal and reinstallation of products are not covered by this warranty.
PLEASE NOTE: International customers requiring a product replacement, please contact the dealer your product was purchased from!
Disclaimer and warranty
DCR-150 REV. 080510
or
or
IMPORTANT!
Pinout on 1/8” Jack connector:
Left
audio GND
Right
audio
Video
* Video output only works when connected to
an iPod video accessory.
4