background image

IV-18(

ИВ

-18)VFD Tube Clock               

Energy Pillar

 

Operation Instruction     

v1.2.0

 

Contents 

Attention……..………….…………………………………………………………………………………………………………….……  2
Functional features….…………………………………………………………………………….……………………………………  2
Technical specifications………………………………………………………………………………………...……………….……  2
Package content………………………………………………………………………………………...….……………………………  3
Appearance layout………………………………………………………………………………..……….……………………………  3
IR remote control introduction……………………………………………..…………………….………………………………  3
Warning tone introduction….…………………………………..………………………...….……………………………………  4
Display mode switch……………………………………………………..……………………………………………………………  4
Power on/off…………………………………………………………….……………………..…………………………………………  4
Adjust brightness………………………………………………………………………….……………………………………………  4
Temperature unit  ℃/℉……………………………………………………………….……………………..………………………  5
Set time………………………………………………………………………………………………………………………………………  5
Set date………………………………………………………………………………………………………………………………………  5
Set alarm……………………………………………………………………………………………….……………………………………  5
Menu 1: Date format YY-MM-DD/YY-DD-MM/DD-MM-YY/MM-DD-YY…………………………….………  6
Menu 2: Time format 12H/24H…………………………………………………………………………………………..………  6
Menu 3: Set UTC…………………………………………………………………………………………………………………………  6
Menu 4: GPS Status……………………………………………………………………………………………………………….……  7
Menu 5: Set GPS BAUD RATE………………………………………………………………………………………………………  7
Menu 6: Set leader 0 mode…………………………………………………………………………………………………………  7
Menu 7: Set Buzzer mode……………………………………………………………………………………………………..……  8
Menu 8: Date interval of scrolling display……………………………………………………………………………..……  8
Menu 9: Temp interval of scrolling display…………………………………………………………………………….……  8
Menu 10: Set auto power off Time…………………………………………………………………………………………..…  9
Menu 11: Set auto power on Time…………………………………………………………………………………………..…  9
Timer function……………………………………………………………………………………………………………………………  10
Special function  …………………………………………………………………………………………………………………..……  10
Announcements  ………………………………………………………………………………………………………………….……  10 

Summary of Contents for IV-18











Reviews: