17404 Ver 2.4/47556B
READYKEY
K3000 / D8300 Series
KeyPAC Readers
Operation & Installation Guide
Figure 1: Low Profile
(K3001 / D8301)
Figure 2: Vandal Resistant
(K3002 / D8302)
Figure 3: Mullion (K3003 / D8303)
1.0
Introduction
These readers read
KeyPAC
ID-devices including ISO thickness ID cards. They
do not
read the earlier
K2000 / D8200 series ID devices. Make sure that you specify
KeyPAC
whenever you buy ID devices.
1.1
Part Numbers
K3001 / K3001W and D8301 are KeyPAC Low Profile Readers
K3002 / K3002B and D8302 are KeyPAC Vandal Resistant Readers (Stainless Steel or Brass)
K3003 / K3003W and D8303 are KeyPAC Mullion Readers
Note: The K3000 Series readers are available to Readykey Dealers only.
1.2
Compatible ID Devices
The KeyPAC range will not work with the older Readykey ID devices. The following are part codes for
compatible ID devices:
Part Number
Description
K3011-10
KeyPAC ISO Thickness Card (pack of 10)
K3011M-10
KeyPAC ISO Thickness Card with Magnetic Stripe (pack of 10)
K3010-10
KeyPAC Tokens (pack of 10)
K3011WG-10 / D8339-10
KeyPAC Cards with Wiegand Stickers (pack of 10)
3010WG-10 / D8338-10
KeyPAC Tokens with Wiegand Stickers (pack of 10)
Table 1: Compatible ID Devices
Note:
The K3000 Series Devices are available to Readykey Dealers only.
2.0
Overview
2.1
Description
Each reader may be mounted internally or externally without any special weather protection, however the
Vandal Resistant Reader is better suited to outdoor use.
Other important features include:
•
Suitable for mounting on metallic and non-metallic surfaces
•
Integral red/green LED
•
Tamper protection
•
Low idle current consumption
•
Integral sounder (not Vandal Resistant)
