background image

 

SPBD-1250A4Q1R

 

DELTA ELECTRONICS, INC.

 

1 Revision: 

S1

03/12/2007

www.deltaww.com

 

Intelligent SFP Bi-Directional Transceiver 
Module for Gigabit Ethernet   

 

 

 

FEATURES 

z

 

RoHS compliant 

z

 

Digital Diagnostic SFF-8472 Compliant 

z

 

Simplex LC connector with 1310nm 
Transmitter and 1490nm Receiver 

z

 

Integrated with WDM filter to cut 1550nm and 
1650nm optical signal off 

z

 

 3.3V power supply and TTL logic 
interface 

z

 

Bellcore GR-468 compliant 

z

 

Laser class 1 product which comply with the 
requirements of IEC 60825-1 and IEC 60825-2

Description 

The SPBD-1250xxxx series are hot pluggable 

3.3V Small-Form-Factor (SFP) Bi-Directional 
transceiver module designed expressly for 
high-speed communication applications that 
require rates of up to 1250Mbit/sec. It is compliant 
with the Gigabit Ethernet standards, as well as the 
SFP Multisource Agreement (MSA). 

 
The SPBD-1250xxxx transceivers provide with 

the LC receptacle that is compatible with the 
industry standard LC connector. The transceiver is 
also compatible with industry standard RFT 
connector and cage. It also includes a LOS (Loss 
Of Signal) circuit that provides a TTL logic-high 
output when an unusable optical signal level is 
detected. 

 
The module includes 1310nm un-cool FP laser, 

InGaAs PIN, Preamplifer and WDM filter in a 
high-integrated optical assembly for high-density 
system application. The SFP Bi-Directional 
transceiver can upgrade transmission capacity very 
convenient without installing new fibers. 

 

Application 

z

  IEEE 802.3ah 1000BASE-BX10 

z

 Gigabit Ethernet Application 

z

 FTTx WDM Broadband Access 

z

 Switch to switch/backbone interface 

 

 

Performance 

z

  SPBD-1250A4Q1R data link up to 10km in 

9/125um single mode fiber. 

Summary of Contents for SPBD-1250A4Q1R











Reviews: