background image

Dell™ Vostro™ A90 Service Manual 

 

Model PP39S 

 

Notes, Notices, and Cautions 

Information in this document is subject to change without notice. 

© 2008 Dell Inc. All rights reserved.

 

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, and

 Vostro 

are trademarks of Dell Inc.; 

Bluetooth

 is a registered trademark owned by Bluetooth SIG, Inc. and is used by Dell 

under license. 

Microsoft

Windows, 

a n d

 Windows XP 

are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any 
proprietary interest in trademarks and trade names other than its own. 

September 2009 Rev. A01 

Before You Begin

  

Module Cover

  

Memory Module

  

Solid-state Drive

  

Wireless Mini-Card

  

Keyboard

  

Palm Rest

  

Internal Card With Bluetooth

® 

Wireless Technology

  

Power Button Board

  

Display

  

Speaker 

 

Camera

  

System Board

  

Microphone

  

Coin-Cell Battery

  

Flashing the BIOS

  

NOTE: 

A NOTE indicates important information that helps you make better use of your computer. 

 

NOTICE: 

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. 

 

CAUTION: 

A CAUTION indicates a potential for property damage, personal injury, or death. 

Summary of Contents for Vostro A90






































Reviews: