Dell Inspiron 120L Service Manual Download

Page: 1 / 42

Dell™ Latitude™ 120L Service Manual

Model PP21L

Notes, Notices, and Cautions

Information in this document is subject to change without notice.

Reproduction in any manner whatsoever without the written permission of Dell Inc.

is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo, and

Latitude

are trademarks of Dell Inc.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

January 2006 Rev. A00

Before You Begin

Processor Thermal-Cooling Assembly

System Components

Processor Module

Memory, Optical Drive, and Mini PCI Card

Speakers

Hard Drive

System Board

Hinge Cover

Antenna

Keyboard

Fan

Display Assembly

Flashing the BIOS

Palm Rest

Base Plastics

Modem

Pinout Assignments for I/O Connectors

Coin-Cell Battery

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for Inspiron 120L











































Search results

Summary of Contents for Inspiron 120L

Reviews:

Related manuals for Inspiron 120L

Brands by name

Popular brands

Dell Inspiron 120L, Service Manual

Search results

Summary of Contents for Inspiron 120L

Reviews:

Related manuals for Inspiron 120L

Brands by name

Popular brands