Dell 540s - Studio Slim Desktop Pc Service Manual Download

Page: 1 / 37

Dell Studio™ Slim 540s Service Manual

Notes, Notices, and Cautions

Information in this document is subject to change without notice.

Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.

Trademarks used in this text:

Dell

, the

DELL

logo, and

Dell Studio

are trademarks of Dell Inc.;

Intel

is a registered trademark of Intel Corporation in the U.S. and other countries.;

Microsoft

and

Windows

are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries.

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. disclaims any
proprietary interest in trademarks and trade names other than its own.

Model: DCSLA

August 2008 Rev. A00

Technical Overview

Before You Begin

Replacing the Computer Cover

Replacing the Support Bracket

Replacing the Front Panel

Replacing Memory Module(s)

Replacing PCI/PCI Express Card(s)

Replacing Drives

Replacing Fans

Replacing the Front I/O Panel

Replacing the Processor

Replacing the System Board

Replacing the Power Supply

Replacing the Battery

Replacing the Rubber Foot

System Setup

NOTE:

A NOTE indicates important information that helps you make better use of your computer.

NOTICE:

A NOTICE indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

CAUTION:

A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for 540s - Studio Slim Desktop Pc






































Search results

Summary of Contents for 540s - Studio Slim Desktop Pc

Reviews:

Related manuals for 540s - Studio Slim Desktop Pc

Brands by name

Popular brands

Dell 540s - Studio Slim Desktop Pc, Service Manual

Search results

Summary of Contents for 540s - Studio Slim Desktop Pc

Reviews:

Related manuals for 540s - Studio Slim Desktop Pc

Brands by name

Popular brands