manualshive.com logo in svg

Dell 2130 Color Laser, User Manual

The Dell 2130 Color Laser is a reliable and efficient printer that delivers vibrant and high-quality prints. To make the most out of its features, don't forget to grab your free User Manual, available for download at our website, ensuring seamless usage and optimal performance.

Share
Download
background image

Dell™ 2130cn Color Laser Printer User's Guide 

 

 

 Notes, Notices, and Cautions  

 

 

 

Information in this document is subject to change without notice.

 

© 

2008 Dell Inc. All rights reserved.

 

Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden. 

Trademarks used in this text: 

Dell

, the 

DELL

 logo, 

Inspiron

, 

Dell Precision

, 

Dimension

, 

OptiPlex

, 

Latitude, PowerEdge, PowerVault, PowerApp, and Dell OpenManage 

are trademarks of Dell Inc.; 

Intel

, 

Pentium, and Celeron 

are registered trademarks of Intel Corporation; 

Microsoft

, 

Windows, Windows Server, MS-DOS and 

Windows Vista 

are either trademarks or registered trademarks of Microsoft Corporation in the United States and/or other countries. 

EMC

 is the registered 

trademark of EMC Corporation; 

ENERGY STAR

 is a registered trademark of the U.S. Environmental Protection Agency. As an ENERGY STAR Partner, Dell Inc. has 

determined that this product meets the ENERGY STAR guidelines for energy efficiency; Adobe and Photoshop are registered trademarks or trademarks of 
Adobe Systems Incorporated in the United States and/or other countries. 

Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Dell Inc. 
disclaims any proprietary interest in trademarks and trade names other than its own. 

Our printer software uses some of the codes defined by the Independent JPEG Group. 

 

 

UNITED STATES GOVERNMENT RESTRICTED RIGHTS  

This software and documentation are provided with RESTRICTED RIGHTS. Use, duplication or disclosure by the Government is subject to restrictions as set 
forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at DFARS 252.227-7013 and in applicable FAR provisions: Dell 
Inc., One Dell Way, Round Rock, Texas, 78682, USA. 

November 2008 Rev. A01 

 

 

Dell™ 2130cn Color Laser Printer User's Guide

 

Finding Information

 

About Your Printer

 

Installing the Print Head Device (PHD) Unit and Toner Cartridges

 

Connecting Your Printer

 

Dell Printer Configuration Web Tool

 

Installing Optional Modules

 

Print Media Guidelines

 

Loading Print Media

 

Operator Panel

 

Printer Settings

 

Understanding the Tool Box Menus

 

Understanding the Printer Menus

 

Understanding Your Printer Software

 

Printing

 

Setting Up for Shared Printing

 

Understanding Fonts

 

Understanding Printer Messages

 

Clearing Jams

 

Troubleshooting Guide

 

Installing Printer Drivers

 

Printing With Web Services on Devices (WSD)

 

Maintaining Your Printer

 

Removing Options

 

Printer Specifications

 

Appendix

 

 

NOTE: 

A 

NOTE

 indicates important information that helps you make better use of your printer.

 

NOTICE: 

A 

NOTICE

 indicates either potential damage to hardware or loss of data and tells you how to avoid the problem.

 

CAUTION: 

A CAUTION indicates a potential for property damage, personal injury, or death.

Summary of Contents for 2130 Color Laser













































































































































































































Reviews:

No comments

Related manuals for 2130 Color Laser

Xerox 3270 Programmer'S Manual preview
3270
Brand: Xerox Pages: 34
Lexmark Jetprinter Disney Edition Z615 Series Quick Start Manual preview
Jetprinter Disney Edition Z615 Series
Brand: Lexmark Pages: 2
Tally T2150 SprintPro Maintenance Manual preview
T2150 SprintPro
Brand: Tally Pages: 124
NEC SuperScript 610 User Manual preview
SuperScript 610
Brand: NEC Pages: 105
ABLE Systems Ap890 User Manual preview
Ap890
Brand: ABLE Systems Pages: 12
Oki C9800hdn Manual De Instalação Do Software preview
C9800hdn
Brand: Oki Pages: 20
Lexmark XM3250 User Manual preview
XM3250
Brand: Lexmark Pages: 289
Citizen iDP-3535 Service Manual preview
iDP-3535
Brand: Citizen Pages: 37
Konica Minolta bizhub C308 Quick User Manual preview
bizhub C308
Brand: Konica Minolta Pages: 4
Oce VarioLink 2650cp Quick Setup Manual preview
VarioLink 2650cp
Brand: Oce Pages: 2
HEIDELBERG Suprasetter 106 Operation preview
Suprasetter 106
Brand: HEIDELBERG Pages: 91
Oki B2520 Brochure & Specs preview
B2520
Brand: Oki Pages: 2
Nagel 2S Trimmer Installation Manual preview
2S Trimmer
Brand: Nagel Pages: 22
ADITIVA 3D ENDER 3 BELT KIT Assembly Manual preview
ENDER 3 BELT KIT
Brand: ADITIVA 3D Pages: 43
Xerox 8560/SDN - Phaser Color Solid Ink Printer Quick Use Manual preview
8560/SDN - Phaser Color Solid Ink Printer
Brand: Xerox Pages: 16
Infinite Peripherals MP43 User Manual preview
MP43
Brand: Infinite Peripherals Pages: 32
Xerox WORKCENTRE 7755 Quick Use Manual preview
WORKCENTRE 7755
Brand: Xerox Pages: 20
Kyocera ecosys M2735DW First Steps Quick Manual preview
ecosys M2735DW
Brand: Kyocera Pages: 16

Brands by name

Popular brands

Load more brands