background image

ISO 9001:2008

Quality Management Systems

Systéme de Qualité

www.sgs.com

FOR YOUR PROTECTION

Content

Page 2  /  For your protection

Page 3  /  Technical data and information

Page 3  /  Description of the product

 

LCD display 

Page 3  /  Directions for use

 

Connecting the battery

 

Switching the device on and off

 

Turning the display backlight on and off 

 

Setting the detection limit

 

Alarm activation

Page 3  /  Caution

Page 3  /  Basic information concerning carbon monoxide

Page 4  /  Testing the detector

Page 4  /  Maintenance

Page 4  /  General warranty terms and conditions

DEGA PBC-EL II

Portable Carbon Monoxide Detector

INSTRUCTION 

MANUAL

Reproduction of this manual, or any part thereof, in any form, without the prior written permission of DEGA CZ s.r.o. 

is prohibited.

DEGA CZ s.r.o. reserves the right to alter the specifications of the hardware and software described in this manual at 

any time and without prior notice.

DEGA CZ s.r.o. bears no liable for any damage resulting from the use of this device!

In the event of an equipment failure immediately disconnect the item from the power supply 

(i.e. remove the battery)

If you notice any unusual odour or smoke emanating from the product, remove the battery and allow the product 

checked at an authorised service centre or by the manufacturer.

Do not use the device near flammable gases or in areas where there is the potential presence of such gases

Do not use electronic equipment in the presence of a flammable gas; this could cause a fire or an explosion. The 

product is not designed for use in industrial or commercial spaces nor in „Ex“ hazardous areas. For applications of this 

nature, we recommend the use of DEGA M-Sx-yl II or P-Sx Multi II

Do not disassemble the product and ensure against its contact with water

Contact with internal components of the product may cause an electric shock. In the case of any failure refer the 

servicing of the product exclusively to a certified service centre. Contact with water can create a short circuit in the 

product and consequent damage to property or personal injury.

Summary of Contents for PBC-EL II

Page 1: ...iable for any damage resulting from the use of this device In the event of an equipment failure immediately disconnect the item from the power supply i e remove the battery If you notice any unusual odour or smoke emanating from the product remove the battery and allow the product checked at an authorised service centre or by the manufacturer Do not use the device near flammable gases or in areas ...

Page 2: ...0 The range of measurable values 0 1000ppm Resolution 1ppm Measurement error 5 Type of signalling Acoustooptical Dimensions 172 x 51 x 26mm 1 Display 2 Button for adjustment of the value 3 Button for moving the cursor 4 Holding the MODE ON button for 2 seconds switches on the device 5 Level 2 alarm red LED 6 Level 1 alarm yellow LED 7 Holding the MODE OFF button for 2 seconds switches off the devi...

Page 3: ...ereby you will reduce the energy consumption of the appliance and prolong its battery life 3 If the display is showing the symbol the battery is fully charged During gradual discharging the dark coloured boxes on the display decrease The symbol indicates that the battery status of your device is too low for it to function normally In this case the battery should be replaced as soon as possible Tur...

Page 4: ... the date that the product is put into operation provided that the buyer ordered its commissioning within three weeks of its receipt The customer expressly acknowledges that during the warranty period that extends beyond the length of the warranty period that is specified in the Commercial Code the statutory warranty s he can neither require replacement of the product nor may s he withdraw from th...

Reviews: