D E E P S E A E L E C T R O N I C S
D S E 8 9 0 / D S E 8 9 1 G A T E W A Y
®
I N S T A L L A T I O N I N S T R U C T I O N S
053-140
ISSUE
3.1
The DSEGateway
®
communicates to the connected controller(s) monitoring the instrumentation
and operating state. If the data changes, the new data is logged in the Gateway’s memory. At
regular intervals the logged data is transmitted to the DSEWebNet host server via ethernet
(DSE890 / DSE891) or GPRS 2G/3G (DSE890 only, SIM card not supplied by DSE).
Additionally, DSE890 contains a GPS location receiver.
For more detailed information please refer to the Operating manual and Software manuals listed
below.
SETUP
You may wish to consult your company IT
department before making changes to your PC
network settings.
Connect the DSEGateway
®
ethernet port directly
to your PC Ethernet port.
You can use either a ‘straight through’ or
‘crossover’ network cable.
Set the PC IP address as shown.
Using Google Chrome, Microsoft Internet
Explorer or Mozilla Firefox, enter the IP address
of the gateway.
Enter the username and password of the
Gateway.
NOTE:-
Username and Password are
both CASE SENSITIVE.
For further details refer to the following DSE
publications available from our website :
www.deepseaplc.com
057-165 DSE890/DSE891 WebNet Gateway Manual
057-168 DSEWebNet Software Manual
Factory Settings
IP Address
Username
Password
192.168.1.100
Admin
Password1234
Deep Sea Electronics Plc.
Tel:+44 (0)1723 890099
Fax: +44 (0)1723 893303
Email: [email protected]
Web: www.deepseaplc.com
Deep Sea Electronics Inc.
Tel: +1 (815) 316-8706
Fax: +1 (815) 316- 8708
TOLL FREE (USA only) :
Telephone: +1 866 636 9703
Email: [email protected]
Web: www.deepseausa.com
