background image

Dedoes U.S. 

Headquarters

1060 W. West Maple Rd. 

Walled Lake, MI 48390

Support & Sales

248-624-7710

[email protected] 

www.dedoes.com

2022

Thrift-O-Matic Mix Machine

 

 

User Manual and Parts LIst

It is recommended to have each Thr

i�-O-Ma�c

 

Mix Machine hard wired to its own electric 

circuit within its loca

ti

on. Please contact your 

local cer

ti

fied 

electrician for more informa

ti

on. 

 

 

 

 

 

WIDTH: 

176 cm / 70 in

HEIGHT: 

41 cm / 17 in 

DEPTH: 

22 cm / 9 in

WEIGHT: 

36 kg / 80 lbs

PART #: 

008040

THRIFT-O-MATIC 

EIGHT GALLON MIX 

MACHINE

 

 

 

 

 

WIDTH: 

177 cm / 70 in

HEIGHT: 

76 cm / 30 in 

DEPTH: 

22 cm / 9 in

WEIGHT: 

58 kg / 125 lbs

PART #: 

016040

THRIFT-O-MATIC 

SIXTEEN GALLON MIX 

MACHINE

The TOM Machine is 

designed to run a 

MAXIMUM of TWO 

HOURS per day or Half 

Hour con

ti

nuously.

Premature wear or 

damage of the 

machine will occur if 

the machine operates 

for longer than the 

suggested run 

ti

me.  

Thri�-O-Ma�c Mixing Machine Motor

The Thri�-O-Ma�c Mixing Machine motors are 1/4 hp, single phase, 

115 volt, 60 Hz with 4.4 FLA.

These motors are explosion proof, rated for Class 1, Div. 1, Group D, 

hazardous loca�ons.The motors are cULus approved.There are two wires 

coming out of the motor which must be hard wired to the power supply. 

Installa�on of the motor to the power supply and other electrical c

onnec�ons must conform to all federal, state, and local regula�ons and 

must be performed by a fully qualified electrician.

Summary of Contents for Thrift-O-Matic






Reviews: