background image

Revised   23  June   2000

Pag 1

.

REMBRANDT  PICCOLO  1.200 w SE

Single  ended  Hot Re-strike Discharge FRESNEL  SPOTLIGHT

INSTRUCTION MANUAL

MANUFACTURER

REPRESENTATIVE

De Sisti Lighting S.p.a.

Via Cancelliera # 10a, 00040 Albano Laziale (Rome- Italy).

Tel. +39/06/934991 Fax. +39/06/9343489

U.R.L.: 

www.desisti.it

        E-mail: 

[email protected]

1. INTRODUCTION

Congratulations on your purchase of a REMBRANDT PICCOLO   1200 W SE  lighting fixture from De Sisti
Lighting . Our commitment to Total Customer Satisfaction and our consolidated experience and leadership in
design innovation and manufacturing of lighting products for the professional Entertainment Industry means
you can depend upon the quality of this product.

The REMBRANDT PICCOLO  1200 W SE  is a compact, highly efficient fresnel lens Spotlight  ,  using Single
ended Hot Re-strike metal halide discharge lamps having  G38  base  and  LCL = 107 mm .

NOTE :  Also available , on special requests , either a pole operated  version , or  a version with connector  of
type  German STD  M1 .

2.  YOKE AND ACCESSORIES ASSEMBLY

De Sisti Lighting S.p.a.

Via Cancelliera # 10a, 00040 Albano Laziale (Rome- Italy).
Tel.

 ..39/06/934991

 Fax.

 ..39/06/9343489

U.R.L. Address: 

www.desisti.it

 E-mail address: 

[email protected]

(MANUAL OPERATED)

MOD.2510

Summary of Contents for REMBRANDT PICCOLO 1.200 w SE

Page 1: ...rience and leadership in design innovation and manufacturing of lighting products for the professional Entertainment Industry means you can depend upon the quality of this product The REMBRANDT PICCOLO 1200 W SE is a compact highly efficient fresnel lens Spotlight using Single ended Hot Re strike metal halide discharge lamps having G38 base and LCL 107 mm NOTE Also available on special requests ei...

Page 2: ...r By this connector the luminaire must be connected to PROPERLY RATED DE SISTI BALLAST magnetic or electronic The wiring diagram of lamp house and connector is shown herebelow Working conditions  Working Position Lighting fixture Max Tilting 90 from horizontal Lamp any see lamp catalogue  Ambient Temperature ta 45 C Max Top Back Sides Front  Minimum distances from inflammable surfaces 0 5 m 0 2...

Page 3: ...shields against the lamp explosion are present and in good condition They consist of a fresnel lens plus wire guard The fresnel lens is made of borosilicate untoughened glass D 150 mm thickness 5 mm typ 3 mm min compliant to DIN 15560 The wire guard is a mesh 25 mm x 25 mm or smallaer wire D 0 8 mm typ made by nickel coated or stainless steel After connection to the ballast follow the ballast inst...

Page 4: ...tal treatment is incurred Replace only with original De Sisti Lighting spare parts Non original cables may not withstand the thermal and mechanical conditions of use B The lamp condition must be checked every 100 working hours In order to avoid explosion the lamp should be changed if it has become damaged or deformed Follow the instructions supplied by the lamp manufacturer C Check the condition o...

Reviews: