background image

© Copyright 2016, Capital Safety

FORM NO: 5902345 

REV: F

User Instruction Manual

The Ultimate in Fall Protection

Ladder Fall Arrest System

Model Numbers:

 

8517714

8517715

8517716

8517717

8517718

8517719

8530140

8530555

8530584

8530652

8530658

8530659

8530674

8530682

8530683

8567715

8567717

8567719

EN795: 1996

Class B

CE Type Test

No. 0086

BSI Product Services

P.O. Box 6221, Kitemark Court

Davy Avenue

Milton Keynes

MK1 9EP UK

CE Production Quality Control

No. 0086

BSI Product Services

P.O. Box 6221, Kitemark Court

Davy Avenue

Milton Keynes

MK1 9EP UK

WARNING:

 This product is part 

of a fall arrest system. These 

instructions must be provided to all 

users and rescuers (see Section 7 - 

Terminology) using this equipment. 

The user must read and understand 

these instructions before assembling 

or using this equipment. The user 

must follow the manufacturer’s 

instructions for each component 

of the system. Manufacturer’s 

instructions must be followed for 

proper use and maintenance of this 

equipment. Alterations or misuse of 

this equipment, or failure to follow 

instructions, may result in serious 

injury or death.

IMPORTANT:

 Before using this 

equipment record the product 

identification information from 

the ID label in the ‘Inspection and 

Maintenance Log’ at the back of this 

manual.

IMPORTANT:

 If you have questions 

on the use, care, application, or 

suitability for use of this safety 

equipment, contact Capital Safety.

EMPLOYEE TRAINING:

 This manual is intended to meet industry standards, including OSHA, ANSI Z359.1, and CE 

EN795 and should be used as part of an employee training program as required by OSHA.

User must read and understand these instructions 

before assembling or using this equipment.

Summary of Contents for FlexiGuard 8517716

















Reviews: