© Copyright 2009, DB Industries, Inc.
IMPORTANT:
Before using this equipment record the product identification information (found on the I.D. label)
in the inspection and maintenance log in section 10.0 of this manual.
USER INSTRUCTION MANUAL
LANYARDS WITH INTEGRAL ENERGY ABSORBERS AND ENERGY ABSORBER
COMPONENTS USED IN PERSONAL FALL ARREST SYSTEMS (ANSI Z359.1)
Figure 1 - EZ STOP
®
Lanyards
Instructions for the following series products:
EZ Stop Lanyards
ShockWave Lanyards
EZ Stop Retrax Lanyards
(See back pages for model numbers)
EZ Stop II
Web Lanyards
EZ Stop II
Shockwave Lanyards
EZ Stop II
Cable Lanyards
EZ Stop II
Tie-back Lanyards
EZ Stop III
Web Lanyards
EZ Stop III
Energy Absorber
Component
EZ Stop Retrax
Retracting Lanyard
Shockwave 2
Lanyard
DESCRIPTIONS
EZ STOP® II WEB LANYARDS
1-in. (2.5 cm) web, 9503175 hook each end.
1-in. (2.5 cm) web, 9503175 hook one end, 2007153 hook other end.
1-in. (2.5 cm) web, 9503175 hook one end, 1200049 wire pipe clamp other end.
1-in. (2.5 cm) web, 9503175 hook one end, 2000108 carabiner other end.
1-in. (2.5 cm) web, web loop one end, 2007153 hook other end.
1-in. (2.5 cm) web, web loop one end, 9503175 hook other end.
1-in. (2.5 cm) web, adjustable, 9503175 hook each end.
1-in. (2.5 cm) web, 100% tie-off, 9503175 hook center, 2007153 hook leg ends.
1-in. (2.5 cm) web, 100% tie-off, 9503175 hook center and leg ends.
1-in. (2.5 cm) web, 100% tie-off, 9503175 hook center, 2000108 carabiner leg ends.
1-in. (2.5 cm) web, 100% tie-off, web loop center, 2007153 hook leg ends.
1-in. (2.5 cm) web, 100% tie-off, web loop center, 9503175 hook leg ends.
This manual is intended to meet the Manufacturer’s Instructions as required by ANSI Z359.1 and should be used
as part of an employee training program as required by OSHA.
Form: 5902143 Rev: L
