background image

www.dbtechnologies.com

 [email protected]

 

 

 

VIO S318 

 

Rev 1.2 cod. 420120244Q 

 
 

 
 
 

 
 
 
 
 
 
 
 
 

 
 

 
 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 
 

Quick start user manual 

Section 1 

 

 
 

 
The warnings in this manual must be observed together with the "USER MANUAL - Section 2"

Le avvertenze nel presente manuale devono essere osservate congiuntamente al “MANUALE D’USO – Sezione 2”.  

Die Warnungen in diesem Handbuch müssen in Verbindung mit der "BEDIENUNGSANLEITUNG - Abschnitt 2" beobachtet 
werden”.  

Les avertissements specifiés dans ce manuel doivent être respectés ainsi que les "CARACTERISTIQUES TECHNIQUES -
Section 2" 

Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del “MANUAL DEL USUARIO” - 
Sección 2”.

 

 

A.E.B. Industriale Srl Via Brodolini, 8 Località Crespellano 40053 VALSAMOGGIA BOLOGNA (ITALIA)              
Tel +39 051 969870 Fax +39 051 969725 www.dbtechnologies.com [email protected]

 

 

 

Summary of Contents for VIO S318

Page 1: ...en in diesem Handbuch müssen in Verbindung mit der BEDIENUNGSANLEITUNG Abschnitt 2 beobachtet werden Les avertissements specifiés dans ce manuel doivent être respectés ainsi que les CARACTERISTIQUES TECHNIQUES Section 2 Las advertencias del presente manual se deben tener en cuenta conjuntamente con las del MANUAL DEL USUARIO Sección 2 A E B Industriale Srl Via Brodolini 8 Località Crespellano 4005...

Page 2: ...tal handling W Rear threaded holes for wheel mounting SWK18 optional KIT X Cable tracks to house cables in stacked installation Y Roping points Z to secure the subwoofer Don t use handles and or roping points to suspend VIO S318 These mounting holes handles and mechanical devices are used to install S318 in different configurations for various stage needs In particular some installation examples a...

Page 3: ...r In cardioid configuration please note that the cardioid preset switch 3 when active bypass Polarity and Delay controls d In case of remote control connect the Data Input 13 to the hardware remote controller RDNet Control 2 or RDNet Control 8 with cables equipped with etherCON connectors Then connect the Data Output 12 to the Data Input 13 of a possible second device and so on When the RDNet netw...

Page 4: ...te in E5 Electromagnetic environments FCC CLASS A STATEMENT ACCORDING TO TITLE 47 PART 15 SUBPART B 15 105 This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment This equipmen...

Reviews: