background image

Option

C-Band Feed

Back View

Series 1253

2.4M

C & KU-BAND

RECEIVE ONLY

Key Features

· Precision compression

molded centerfed reflector

· Series 1252 - Az/El Mount

· Series 1253 - Polar mount

· Low transportation cost with

three panel reflector

· Individual panels inter-

changeable and field

replaceable

·  Galvanized steel mounts

Manufactured by

 the

world’s largest manufacturer of

Rx/Tx VSAT antennas.  We have

the broadest product line in the

industry including Receive Only,

Rx/Tx and Rural Telephony

antenna systems.  

N

ineteen antenna sizes, 47cm to

4.5M.  

Manufacturer

 is the leader in

obtaining type certifications and

approvals for Intelsat, AsiaSat

and Eutelsat.  

The

 antennas

provide the best quality in the

market due to the sophisticated,

precision SMC compression

molding process technology.

P

rovides the best value

antenna solution to the market

with competitive prices, the

highest quality products and

superb engineering support.

P24F

DAWNco • 3340 S. Lapeer Rd • Orion, MI 48359-1320 • Ph (248) 391-9200 • Fax (248) 391-9207 • [email protected]

You are entitled to the manufacturer's limited express warranty, if any, that accompanies the product. DAWNco makes no 

additional or independent warranty. All other warranties, express or implied, including the warranties of merchantability and 

fitness for a particular purpose are disclaimed. We do our best to be accurate. We are not responsible for any typographical, 

photographic or technical errors. See "Policies for DAWNco" under the "Answers" button at the DAWNco web site. 

Summary of Contents for 1252 Series
































Reviews: