Product #7852, 7852M, 7856, 7856M
R
A I N
C
O L L E C T O R
I I
S
T A N D A R D
A N D
I
N D U S T R I A L
I
N S T A L L A T I O N
M
A N U A L
This instruction manual takes you step-by-step through the procedures
required to install the Rain Collector II. The Rain Collector II is designed for
use with any of Davis’ weather stations (with the exception of the Perception
II
®
Station). Each station can display rainfall in either inches or millimeters. For
greatest accuracy, however, use a rain collector which measures in the same
unit in which you wish to display rainfall.
Instructions for displaying rainfall on the Weather Wizard II-S
®
, Weather Wiz-
ard III
®
, and Weather Monitor II
®
are also included in this manual. Instructions
for displaying rainfall on the GroWeather™, Health EnviroMonitor™, and
Energy EnviroMonitor™ are contained in the station’s user’s manual.
C
OMPONENTS
The Rain Collector II includes the following components. Please make sure you
have all listed components before continuing.
✦
Rain Collector with Cable
The rain collector comes with the cone attached to the base. The standard
version of the rain collector comes with a 40’ (12 m) cable. The industrial
version comes with a 16’ (5 m) cable.
✦
Four #8 x 3/4" Screws
✦
Debris Screen
This screen is placed into the rain collector cone to help prevent debris
from clogging the funnel hole.
