C
®
US
E156931
85-264Vac or 110-340Vdc
Universal Input
Murata Power Solution’s DMS-PS-CM Series
of high-efficiency, chassis mount AC/DC
power supplies feature low noise (40mV on
main, 8mV on auxiliaries), fully-is24,
+12V, and +5V outputs, making them perfect
for powering today’s complex instrumenta-
tion. A high-current main output is isolated
from the AC line by 3000Vac. In dual- and
triple-output models, the low-current auxiliary
outputs are isolated from the main output by
1000Vdc, and from each other by 2000Vdc,
effectively providing double isolation from the
AC line! This unprecedented isolation elimi-
nates ground loop problems in complex,
multiple-instrument applications.
Full-load efficiencies of up to 80% and
output-power ratings of 5, 10 or 16 Watts,
combine to ensure minimal ac power con-
sumption. For intermittent use or low-power
applications, the 5-Watt model’s no-load
quiescent consumption with a nominal
120Vac input is a mere 0.6 Watts---that’s
nearly seven times less than a standard 4W
night light! These low cost, high-efficiency
power supplies can significantly reduce
long-term electricity costs in low (<5Watts)
to medium (<16Watts) power applications.
All DMS-PSX-CM power supplies fea-
ture universal inputs of 85-264Vac 50/60Hz,
built-in line fuses, and on-board ‘Power On’
LED indicators. At full rated load, hold-up
time is typically 20ms at 120Vac, and 80ms
at 230Vac. All outputs provide indefinite
short-circuit protection and, for added reli-
ability, the main high-current output also
includes overvoltage protection. A rugged,
vibration-proof, chassis mount package
incorporates large, shock-resistant terminal
blocks for all I/O connections.
Multiple outputs, low noise, low cost,
high efficiency, double isolation, and rugged
construction combine to make DMS-PSX-
CM Series AC/DC power supplies the
ideal choice for powering today’s sensitive
instrumentation, and any electronic device
that requires a reliable dc voltage!
Figure 1. DMS-PS-CM Series Simplified Schematic
or
110-340Vdc
TB4
F1
1A/250V
TB1
LDO
Regulator
DC/DC
Converter
IN
OUT
GND
AC(L)
AC(N)
FG
+
V1
–
TB2
+
V2
–
LDO
Regulator
DC/DC
Converter
AC/DC Converter
Drive
Circuitry
(Auxilliary)
(Auxilliary)
(Main)
IN
OUT
GND
TB3
+
V3
–
+
+
+
+
+
+
+
+
+
–
–
–
–
**
*
**
**
Used only on dual and triple-output models
*
Not used on single-output models
85-264V
50/60Hz
or
110-340Vdc
+
Figure 1. Simplified Schematic
FEATURES
N
Up to 80% efficient single, dual, and triple-
output model
N
Individual, fully-isolated outputs:
3000Vac on main
4000V double-isolation on auxiliaries
N
Available with +5V, +12V, and +24V outputs
N
Low noise: 40mVp-pk on main, 8mVp-pk on
auxiliaries; Ideal for sensitive instrumentation
N
Universal input: 85-264Vac @ 47-63Hz or
110-340Vdc
N
Choice of 5, 10, or 16W models for minimal
system power-consumption
N
Standby power consumption as low as 0.6W
N
Short-circuit protection on all outputs;
OVP on main output
N
Built-in ac mains fuse & ‘Power On’ indicator
N
5W models operate up to 5 LED-display DPM’s
N
Vibration-resistant, chassis-mount
modular packages
N
EMC compliant; UL/CSA recognized
N
Low cost!
DMS-PS-CM Series
High Efficiency, AC/DC Instrumentation Power
Supplies with Individually Isolated Outputs
MPM_DMS-PS-CM.B02
Page 1 of 8
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com
Technical enquiries
email: [email protected], tel:
+1 508 339 3000
8
85-
264
Vac
o
or
11
0-3
40
0V
dc
Un
iv
e
er
sa
l
In
p
u
t
FE
AT
UR
ES
OBSOLETE PRODUCT
Contact Factory for Replacement Model
