![background image](http://html1.mh-extra.com/html/datalogic/memor-11/memor-11_manual_3739319001.webp)
NOTE: Read carefully the MEMOR 11 User Manual
(available at
www.datalogic.com
) before performing any
type of connection to the MEMOR 11.
The user is responsible for any damage caused by
incorrect use of the equipment or by inobservance of the
indication supplied in the user manual.
GENERAL SAFETY RULES
CAUTION:
• Before using the devices and the battery packs, read
this Addendum carefully.
• Use only the components and accessories supplied
by the manufacturer for the specific MEMOR 11 being
used.
• Do not attempt to disassemble the MEMOR 11 device,
as it does not contain parts that can be repaired by the
user. Any tampering will invalidate the warranty.
• When replacing the battery pack or at the end of the
operative life of the MEMOR 11 device, disposal must
be performed in compliance with the laws in force in
your jurisdiction.
• Do not submerge the MEMOR 11 in liquid products.
• For further information or support, refer to the
Datalogic web site:
www.datalogic.com
.
CAUTION:
Do not apply any sticker to the MEMOR 11.
POWER SUPPLY
The device is intended to be supplied by a self-contained rechargeable
Lithium Ion battery pack (UL listed LPS/SELV power source) and/or by
UL Listed/CSA Certified Power Unit LPS/SELV power source which sup-
plies power directly to the unit via the TYPE-C USB connector of the
cable. The device could be also used with Certified Accessories (Dock/
Cradle) which supply Wireless power. The Dock/Cradle accessories are
intended to be supplied by a UL Listed/CSA Certified Power Unit LPS/
SELV which supplies power via the power connector of the cable. Any
changes or modifications to equipment, not expressly approved by
Datalogic could void the user’s authority to operate the equipment.
BATTERY INFORMATION
CAUTION: Do not incinerate, disassemble, short
terminals, or expose to high temperature. Risk of fire and
explosion. Use specified charger only. Risk of explosion
if the battery is replaced by an incorrect type. Dispose of
batteries as required by local authorities.
By default, the main battery pack is disconnected at the factory to avoid
damage due to excessive draining.
Rechargeable battery pack is less than half of full charge when deli-
ve-red. Charge the battery pack as indicated in the Quick Start Guide or
in the User Manual, before using the MEMOR 11 terminal.
The battery pack autonomy varies according to many factors, such as
the frequency of barcode scanning, RF usage, battery life, storage, envi-
ronmental conditions, etc.
To maximize battery life, turn off radios when they are not needed.
Close to the limits of the working temperature, some battery perfor-
mance degradation may occur.
The MEMOR 11 should be charged at an ambient temperature
between 20 - 35° C (68 to 95°F) to achieve the maximum charging
rate.
Never charge the device battery in a closed space where excessive
heat can build up. As a safety precaution, the battery may stop char-
ging to avoid overheating.
The MEMOR 11 gets warm during charging; this is normal and does
not mean a malfunction.
Even if the storage temperature range is wider, in order to achieve
the longest battery life, store the terminal and the spare batteries
between 20 to 30°C (68 to 86°F).
To maximize operating autonomy, the Memor 11 checks its battery
level at all times. If the battery is not sufficiently charged, the Memor
11 will not turn on when the ON/OFF Power button is pressed.
In this case, either substitute with a charged battery, insert the
Memor 11 into a powered cradle, or plug it into a wall charger.
CAUTION: Avoid storing batteries for long periods in a
state of full charge or very low charge or in a state of
continuous charging, especially at temperature higher
than 30°C.
We recommend charging the battery pack every two to
three months, if it is not used for long time, to keep its
charge at a moderate level to maximize battery life.
Annual replacement of rechargeable battery pack
avoids possible risks or abnormalities and ensures
maximum performance.
WARNING: Use only Datalogic approved batteries and
accessories for battery charging.
Risk of explosion if battery is replaced by an incorrect
type.
Dispose of used batteries according to the instructions.
Il y a risque d’explosion si la batterie est remplacée par
une batterie de type incorrect.
Mettre au rebut les batteris usagées confor mément
aux instructions.
CAUTION: Do not put any foreign object such as, but not
limited to, coins, paper clips, stickers inside the slot of
any of the wireless charging docks (see the examples
below).
BATTERY SAFETY GUIDELINES
WARNING: Installing, charging and/or any other action
should be done by authorized personnel and following
this manual.
The battery pack may get hot, explode, ignite, and/or
cause serious injury if exposed to abusive conditions.
If the battery pack is replaced with an improper type,
there is risk of explosion.
Do not place the battery pack in or near a fire or
other heat source; do not place the battery pack in
direct sunlight, or use or store the battery pack inside
unventilated areas in hot weather; do not place the
battery pack in microwave ovens, in clothes dryers, in
high pressure containers, on induction cook surfaces or
similar devices. Doing so may cause the battery pack to
generate heat, explode or ignite. Using the battery pack
in this manner may also result in a loss of performance
and a shortened life expectancy.
To power the cradle, use only a Datalogic approved
power supply. The use of an alternative power supply
will void the product warranty, may cause product
damage and may cause heat, an explosion, or fire.
MEMOR™ 11
SAFETY & REGULATORY
ADDENDUM
Rugged Mobile Computer
with 1D/2D Imager
• All rights reserved • Without limiting
the rights under copyright, no part of this
documentation may be reproduced, stored
in or introduced into a retrieval system, or
transmitted in any form or by any means,
or for any purpose, without the express
written permission of Datalogic S.p.A.
and/or its affiliates • Datalogic and the
Datalogic logo are registered trademarks
of Datalogic S.p.A. in many countries,
including the U.S. and the E.U.
This document is an addendum to the
Quick Start Guide (QSG) for this product.
See the QSG for additional product
information.
www.datalogic.com
©2023 Datalogic S.p.A. and/or its affiliates
852002181 (Rev. B) October 2023
Datalogic S.r.l.
Via San Vitalino 13
40012 Calderara di Reno (BO)
Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2023 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of this documentation may be repro-
duced, stored in or introduced into a retrieval system, or transmitted in any form or by any means, or for any
purpose, without the express written permission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license to reproduce and tran-
smit this documentation for the purchaser's own internal business purposes. Purchaser shall not remove or
alter any proprietary notices, including copyright notices, contained in this documentation and shall ensure
that all notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic website (
www.datalogic.com
).
If you visit our website and would like to make comments or suggestions about this or other Datalogic publi-
cations, please let us know via the "Contact" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that is complete and accu-
rate, however, Datalogic shall not be liable for technical or editorial errors or omissions contained herein, nor
for incidental or consequential damages resulting from the use of this material. Datalogic reserves the right
to change any specification at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries, including
the U.S.A. and the E.U.
Memor is a trademark of Datalogic S.p.A. and/or its affiliates. All other brand and product names may be
trademarks of their respective owners.
Patents
See
www.patents.datalogic.com
for patent list.
This product is covered by one or more of the following patents:
Design patents: EM004675072, EM004803013, EM005513751 0001/0002, GB9004675072 0001/0002,
GB9004803013 0001/0002, GB9005513751 0001/0002, USD933062, ZL201830392430.1, ZL201930042130.5
Utility patents: EP1804089B1, EP1825417B1, EP1828957B1, EP2315156B1, EP2517148B1, EP2521068B1,
EP2616988B1, EP2649555B1, EP2795534B1, EP3234750B1, JP5192390B2, US10671277, US10762405,
US10817685, US7234641, US7721966, US8113430, US8245926, US8561906, US8888003, US8915443,
US9122939, US9430689, US9798948, ZL200680050007.8, ZL200980163411.X, ZL201080071124.9,
ZL201180044793.1, ZL201580074380.6.
WEEE STATEMENT
Waste Electrical and Electronic Equipment (WEEE) Statement
English
For information about the disposal of Waste Electrical and Electronic Equipment (WEEE), please refer to the
website at
www.datalogic.com
.
Italian
Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche consultare il sito Web
www.datalogic.com
.
French
Pour toute information relative à l’élimination des déchets électroniques (WEEE), veuillez consulter le site
internet
www.datalogic.com
.
German
Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE) erhalten Sie auf der Webseite
www.datalogic.com
.
Spanish
Si desea información acerca de los procedimientos para el desecho de los residuos del equipo eléctrico y
electrónico (WEEE), visite la página Web
www.datalogic.com
.
Portuguese
Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e Eletrônicos (WEEE -Waste
Electrical and Electronic Equipment), consultar o site web
www.datalogic.com
.
Chinese
有关处理废弃电气电子设备 (WEEE) 的信息, 请参考Datalogic 公司的网站
www.datalogic.com
.
Japanese
廃電気電子機器(WEEE)の処理についての関連事項はDatalogicのサイト
www.datalogic.com
をご
参照下さい。.