![background image](http://html2.mh-extra.com/html/datalogic/lanehawk-lh5000/lanehawk-lh5000_quick-start-manual_5127961001.webp)
Datalogic S.r.l.
Via S. Vitalino, 13
40012 Calderara di Reno — Italy
Tel. +39 051 3147011
Fax +39 051 3147205
©2017-2021 Datalogic S.p.A. and/or its affiliates
All rights reserved. Without limiting the rights under copyright, no part of this
documentation may be reproduced, stored in or introduced into a retrieval system,
or transmitted in any form or by any means, or for any purpose, without the express
written permission of Datalogic S.p.A. and/or its affiliates.
Owners of Datalogic products are hereby granted a non-exclusive, revocable license
to reproduce and transmit this documentation for the purchaser's own internal
business purposes. Purchaser shall not remove or alter any proprietary notices,
including copyright notices, contained in this documentation and shall ensure that all
notices appear on any reproductions of the documentation.
Electronic versions of this document may be downloaded from the Datalogic website
(www.datalogic.com). If you visit our website and would like to make comments or
suggestions about this or other Datalogic publications, please let us know via the
"Contact" page.
Disclaimer
Datalogic has taken reasonable measures to provide information in this manual that
is complete and accurate, however, Datalogic shall not be liable for technical or
editorial errors or omissions contained herein, nor for incidental or consequential
damages resulting from the use of this material. Datalogic reserves the right to
change any specification at any time without prior notice.
Trademarks
Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in
many countries, including the U.S.A. and the E.U.
All other trademarks and brands are property of their respective owners.
Patents
See
www.patents.datalogic.com
for patent list.
This product is covered by one or more of the following patents:
Utility patents: US7100824, US7246745, US7646887, US8267316
WEEE Statement
www.datalogic.com
This document is an addendum to the Quick Reference
Guide (QRG) for this product. See the QRG for additional
product information.
Intelligent Lighting and Camera Unit
LANEHAWK™ LH5000
REGULATORY ADDENDUM
©2017-2021 Datalogic S.p.A. and/or its affiliates. All rights
reserved. Without limiting the rights under copyright, no part of
this documentation may be reproduced, stored in or introduced
into a retrieval system, or transmitted in any form or by any
means, or for any purpose, without the express written permis-
sion of Datalogic S.p.A. and/or its affiliates Datalogic and the Data-
logic logo are registered trademarks of Datalogic S.p.A. in many
countries, including the U.S. and the E.U.
850044301 (Rev. C) July 2021
Waste Electrical and Electronic Equipment
(WEEE) Statement
English
For information about the disposal of Waste Electrical and Electronic Equipment
(WEEE), please refer to the website at www.datalogic.com.
Italian
Per informazioni sullo smaltimento delle apparecchiature elettriche ed elettroniche
consultare il sito Web www.datalogic.com.
French
Pour toute information relative à l’élimination des déchets électroniques (WEEE),
veuillez consulter le site internet www.datalogic.com.
German
Informationen zur Entsorgung von Elektro- und Elektronik- Altgeräten (WEEE)
erhalten Sie auf der Webseite www.datalogic.com.
Spanish
Si desea información acerca de los procedimientos para el desecho de los residuos
del equipo eléctrico y electrónico (WEEE), visite la página Web www.datalogic.com.
Portuguese
Para informações sobre a disposição de Sucatagem de Equipamentos Elétricos e
Eletrônicos (WEEE -Waste Electrical and Electronic Equipment), consultar o site web
www.datalogic.com.
Chinese
有关处理废弃电气电子设备 (
WEEE)
的信息, 请参考
Datalogic
公司的网站
www.datalogic.com
。
Japanese
廃電気電子機器
(
WEEE
)
の処理についての関連事項は
Datalogic
のサイト
www.datalogic.com
をご参照下さい。
REGULATORY INFORMATION
FCC
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy, and if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, here is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Canada
Innovation, Science and Economic Development Canada ICES-003 Class B
Compliance statement: CAN ICES-3(B)/NMB-3(B).
Laser Safety
Europe/International
LASER
1
IEC60825-1:2014 © IEC 2014.
Caution Statements — Class II for USA/Canada
ENGLISH
This scanner is certified in the U.S. to conform to the requirements of DHHS/CDRH
21CFR Subchapter J. Maximum output radiation 1mW. Emitted wavelength 660 nm.
Class I and Class II products are not considered to be hazardous. The scanner contains
internally a Visible Laser Diode (VLD) whose emissions do not exceed the maximum
limits as set forth in the above regulations. The scanner is designed so that there is no
human access to harmful laser light during normal operation, user maintenance or
during prescribed service operations.
Caution
•
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous laser light.
•
Do not attempt to open or otherwise service any component in the optics cav-
ity. Opening or servicing any part of the optics cavity by unauthorized person-
nel may violate laser safety regulations. The optics system is a factory only
repair item.
FRENCH
Ce scanner est certifié conforme à la norme DHHS/CDRH 21CFR sous-chapitre J.
Rayonnement de sortie maximale 1mW. Longueur d'onde émise 660 nm.
Les produits de classe I et de classe II ne sont pas considérés dangereux. Le scanner
contient une diode laser visible (VLD) dont les émissions ne dépassent pas les limites
prescrites dans les normes précitées. Le scanneur est conçu de façon à ce qu’il ne soit
pas possible d’accéder à la lumière laser pendant l’utilisation normale, l’entretien par
l’utilisateur et les fonctions de maintenance prescrites.
Attention
•
L’utilisation de procédures de contrôle, réglage ou utilisation autres que celles
spécifiées dans ce document peut entraîner une exposition dangereuse à la
lumière du laser.
•
Ne pas essayer d’ouvrir ni de réparer les composants de la cavité optique.
L’ouverture ou la réparation d’une partie de la cavité optique par une personne
non qualifiée peut entraîner la violation des règles de sécurité relatives au
laser. Le système optique ne peut être réparé qu’en usine.
PRODUCT LABELING
The figures below show the general shape and position of the labels located
on the intelligent lighting and camera unit (ILCU).
Power Requirements
AC Power Requirements
AC Input: 100 - 240 VAC, 50-60 Hz
•
Power Consumption: Operating (Nominal): 9 Watts
Power Over Ethernet Requirements
Complies with IEEE 802.3af-2003 and units shall be connected only to POE
networks without routing to outside the store environment.
Power Consumption (Nominal): 10 Watts
NOTE
Labels are shown to illustrate their location only. Please view the
labels on your product for actual details.
FRONT
Laser Caution Label
PO
W
ER
U
S
B
P
oE
AU
X
Regulatory/
Serial Number Label
BACK